Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Newbie
Join Date: Apr 2013
Location: Longwood, Florida
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6cyl.
Put in a gallon of 50/50, then I had some regular strength and put about half a gallon of that. Plus whatever might still have been in there...(reg. strength/ distilled water mix) Reservoir is full with mostly the straight stuff and some distilled water. I had flushed it last week then filled with antifreeze/distilled, but then ended up draining it again when I had to change the radiator, so I know the stuff in there is fresh...
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Put in a gallon of 50/50, then I had some regular strength and put about half a gallon of that. Plus whatever might still have been in there...(reg. strength/ distilled water mix) Reservoir is full with mostly the straight stuff and some distilled water. I had flushed it last week then filled with antifreeze/distilled, but then ended up draining it again when I had to change the radiator, so I know the stuff in there is fresh...
Newbie
Join Date: Apr 2013
Location: Longwood, Florida
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6cyl.
Nah... if anything, I'm erring more on the side of a 60/40 split of antifreeze to water..
I lifted the front end on the curb, had the heater on high, and let it run with the cap off. Had a bunch of gurgling and sputtering when the fan went on (still no leaks )..then the fan actually cycled off (first time since I started all this!Yay! ) Had more sputtering. Ran it a little more til that died down, then shut her off. Topped off the rad and reservoir, put the cap back on, then started it back up to get it off the curb (my HOA probably hates me enough as it is! LOL)... Gonna wait a little while to cool her down, then check the levels again. If everything looks good, hoping to finally take her for a little drive.
Thanks to everyone for the advice... I feel like a kindergartener that's just made it to first grade..lol
I lifted the front end on the curb, had the heater on high, and let it run with the cap off. Had a bunch of gurgling and sputtering when the fan went on (still no leaks )..then the fan actually cycled off (first time since I started all this!Yay! ) Had more sputtering. Ran it a little more til that died down, then shut her off. Topped off the rad and reservoir, put the cap back on, then started it back up to get it off the curb (my HOA probably hates me enough as it is! LOL)... Gonna wait a little while to cool her down, then check the levels again. If everything looks good, hoping to finally take her for a little drive.
Thanks to everyone for the advice... I feel like a kindergartener that's just made it to first grade..lol
CF Veteran
Join Date: Feb 2012
Location: Kansas
Posts: 2,652
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: 190-hp, 4.0-liter I-6
Swapping my injectors, I think ones leaking so mise well. Should I just go with stock ones or what? I've seen people use 703 and mustang injectors. Which ones?
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
CF Veteran
Join Date: Feb 2012
Location: Kansas
Posts: 2,652
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: 190-hp, 4.0-liter I-6
Seasoned Member
Join Date: Jun 2012
Location: Vancouver BC
Posts: 380
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Engine: 4.0
Two questions At what pint in time Can i lose the vacume ball in my 88? . i have a 93 front axle in the front so i don't have to worry about 4wd engaging.
Is it safe to fab up a smaller ball or dose it have to be that size if i cant lose it completely?
Is it safe to fab up a smaller ball or dose it have to be that size if i cant lose it completely?
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
If you have cruise or AC, you will still need it.
CF Veteran
Join Date: Feb 2012
Location: Kansas
Posts: 2,652
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: 190-hp, 4.0-liter I-6
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 13 Likes
on
12 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output