my89xj

Just another quick question on stretching my frame back out. Would it make sense to use a torch and heat up the damage section before I stretch it? I'm worried about it tearing.

odgreen

Yea. Heat it up

my89xj

Thanks pal.

my89xj

Another question, what year xjs had the gold trim.

odgreen

All..... just gotta find one where the owner paid for it.

my89xj

I can't figure out what had light bezels to buy lol. The renix ones I got, don't fit in my 91+ front clip.

odgreen

Get 91 and up. Or go get the chrome filler rod of a 89 and put it on.

my89xj

Are the 91 ones more trimmed? The ones I have just don't jam up in there.

odgreen

No. Less trimed. 84-90 had a metal trim rod that screwed to the nose. If you peek your head under the lip you will see little flat spots where self tapper screws can go. 91-96 didnt gave that trim piece and it was built onto the grill and head lights surrounds.

my89xj

I'll stop freaking out and look when I get home lol, I just have this huge pile of parts. Thanks od

94XjSport94

Removed brake caliper and one of the bolt holes that hold the caliper to the knuckles thread pulled right out of it. Like what the bolt threads into came out of the knuckle and so I can't replace the top bolt of the caliper. What should I do?

a_shirey

Buy a new caliper?

94XjSport94

No the two bolts that hold the caliper to the knuckle thread through the caliper and into the knuckle. One of the threads in the knuckle pulled out and looked like a spring. So the bolt has nothing to screw into

xj_maniac_newb

I did the same thing, find a bolt that's the same size but just long enough to go through and fit a nut on. Worked great for me, just a little hard to get to the nut to tighten it. 89 Eliminator said in a thread I found his had been like that for like 4 years.

94XjSport94

That's what I was planning on doing just didn't know if there was a preferred course of action. To lowes!