xj_maniac_newb

It was the only solution I could find other than getting another knuckle. It worked pretty good for me.

94XjSport94

Gonna try a bolt and nylock nut. It'll be a tight fit but that's all you can do really

xj_maniac_newb

Is it the top or bottom bolt? If it's the top its easy, mine was the bottom and it wasn't fun.

cruiser54

Helicoil kit.

xj_maniac_newb

Bunch of voodoo.

Lol I was actually gonna try that with mine, but it was late and I didn't feel like experimenting. Already had the nut and bolt.

cruiser54

Easy.

ScikoFaery

got a used starter from a 98 from a person at work
spent 2 almost 3 hours trying to thread the top bolt before taking it out and
realizing that the threads in the hole were stripped....BUT
since i had already converted the clip connector to the o ring like the pre 98s
i was able to buy a new starter for 65$ instead of 140$ and i got it on in less than 10 mins lol! i also cant wait to get a lift cuz if my ***** had been bigger i never would have gotten under there lol

how dumb is that just because the connector is different its 80$ more NO THANKS!

Jayden2332

So took the old 89 out for a ride today and didn't even touch the NSS and drove great for about 5-6 miles then same thing happened lost power to the axle and stopped reprimmed the motor and started kinda rough but once it started ran like a champ again. So I was wondering could re problem be fuel injectors not giving the motor enough gas? If not what could it be? Like I said ran great then while it was moving all of a sudden it was like the tranny was in neutral so I am at a loss right now of what it could be please help me I am about ready to just junk this thing because its just one thin after another.

NewKindOfClown

Glad you got it done
Sounds like intermittent CPS failure. I know someone suggested that. Did you test it?

Jayden2332

I don't know how too can you tell me how too? I really want this jeep to run because its an awesome rig.

DESERTXJ206

Have you verified fuel pressure? Id start with verifying pressure, then test thongs like the cps and so on.

salad

Ahhh so YOU'RE the reason Walmart has "NO TRYING ON UNDERWEAR" at the changing rooms.

Jayden2332

How do I go about doing thing like that?

unionfitter

does anybody know where the closest hose fitting to the fire wall on an 89 intake manifold hooks up to ?

Jayden2332

So my 89 Wagoneer 4x4 inline six is having a problem with staying in gear when I am driving I will go down the road and all of a sudden there is nothing like its in neutral could the problem be the injectors in it? Or what I am at a loss and don't know what to do