Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by Lowrange2
If you're not using the stock air box then you might as well go straight from the engine to the passenger side firewall.
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 13 Likes
on
12 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Cut slot in side of 3" pipe, plumb to cowl, done (I got sidetracked by other projects, haven't plumbed mine yet)
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Ok so tested my TPS. I cooked it, wont adjust at all. I'm looking at a new TPS on rockauto. There's two options the $31 or the $41 dollar one. it seems like the more expensive one is pre set? I thought that wasn't possible for a renix? anyone have some input?
http://www.rockauto.com/catalog/rafr...p?make=JEEP&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=0m2d7cnqg41i7pso9p7v6p0da7
Read some reviews and bought the cheaper one, $44 to my door in two days.
http://www.rockauto.com/catalog/rafr...p?make=JEEP&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=0m2d7cnqg41i7pso9p7v6p0da7
Read some reviews and bought the cheaper one, $44 to my door in two days.
Last edited by my89xj; 06-25-2013 at 08:42 PM.
just got a RC 3" full leaf spring lift for the jeep. since the install a grinding noise has been coming from what i think is the center of the jeep below the shifter. im thinking its the transfer case because i know somtimes a xfer drop is needed after a 3" lift or more but im not sure what that really means. i dont know much about xfer cases. the sound only happens when im coasting with my foot off the gas and brake. any clue what it could be?
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 13 Likes
on
12 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
just got a RC 3" full leaf spring lift for the jeep. since the install a grinding noise has been coming from what i think is the center of the jeep below the shifter. im thinking its the transfer case because i know somtimes a xfer drop is needed after a 3" lift or more but im not sure what that really means. i dont know much about xfer cases. the sound only happens when im coasting with my foot off the gas and brake. any clue what it could be?
Member
Join Date: Apr 2010
Location: southern Idaho
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
problem wiring switch for electric fan..
We installed a 3 core radiator in an 89 cherokee, intending to wire the electric fan for a manual switch. Since the new radiator has no place for the fan sensor, we thought we could cut the wires to the sensor and connect the switch to them. If feasible, is a 30 amp switch adequate? Help me out here! Thanks
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Ok so tested my TPS. I cooked it, wont adjust at all. I'm looking at a new TPS on rockauto. There's two options the $31 or the $41 dollar one. it seems like the more expensive one is pre set? I thought that wasn't possible for a renix? anyone have some input?
http://www.rockauto.com/catalog/rafr...p?make=JEEP&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=0m2d7cnqg41i7pso9p7v6p0da7
Read some reviews and bought the cheaper one, $44 to my door in two days.
http://www.rockauto.com/catalog/rafr...p?make=JEEP&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=0m2d7cnqg41i7pso9p7v6p0da7
Read some reviews and bought the cheaper one, $44 to my door in two days.
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
We installed a 3 core radiator in an 89 cherokee, intending to wire the electric fan for a manual switch. Since the new radiator has no place for the fan sensor, we thought we could cut the wires to the sensor and connect the switch to them. If feasible, is a 30 amp switch adequate? Help me out here! Thanks
CF Veteran
Join Date: May 2011
Location: Glendale,Az
Posts: 1,458
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1990
Model: Cherokee
Engine: 4.0l 6Cyl
Stock 88 XJ 4.0l 4x4 Automatic and NP231 Tcase.
Which front U joints do I need to get for the Axle shafts?
Which are the best or most reliable. (links?)
I've got to do them soon the Poppins driving me crazy while turning in reverse at slow speeds.
Which front U joints do I need to get for the Axle shafts?
Which are the best or most reliable. (links?)
I've got to do them soon the Poppins driving me crazy while turning in reverse at slow speeds.
CF Veteran
Join Date: May 2011
Location: Glendale,Az
Posts: 1,458
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1990
Model: Cherokee
Engine: 4.0l 6Cyl
Also does anyone know where I can buy the connector from the factory harness in the driver door to window motor plug? Mines. Broke and I need to fix it soon!
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by cruiser54
No Renix TPS is pre-set. Got my instructions on how to set it?
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
Putting the trans pan from my 95 parts XJ to my 91.
Anyone got a trick for getting the dipstick tube on the trans pan seperated?
If it gives me crap today, if I even get to it, I'm cutting that SOB. I'm just worried that I might not be able to get it out even after I cut it.
Would putting anti-sieze on it when I put it all back together be a bad thing? As long as it won't get in the ATF?
Anyone got a trick for getting the dipstick tube on the trans pan seperated?
If it gives me crap today, if I even get to it, I'm cutting that SOB. I'm just worried that I might not be able to get it out even after I cut it.
Would putting anti-sieze on it when I put it all back together be a bad thing? As long as it won't get in the ATF?
Junior Member
Putting the trans pan from my 95 parts XJ to my 91.
Anyone got a trick for getting the dipstick tube on the trans pan seperated?
If it gives me crap today, if I even get to it, I'm cutting that SOB. I'm just worried that I might not be able to get it out even after I cut it.
Would putting anti-sieze on it when I put it all back together be a bad thing? As long as it won't get in the ATF?
Anyone got a trick for getting the dipstick tube on the trans pan seperated?
If it gives me crap today, if I even get to it, I'm cutting that SOB. I'm just worried that I might not be able to get it out even after I cut it.
Would putting anti-sieze on it when I put it all back together be a bad thing? As long as it won't get in the ATF?
Remove the bolt that holes the tube in place and lower the pan to the ground. Fish the tube out. It'll come out in one piece.
Worst case you might need to get the Jeep up off the ground.