Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
#376
CF Veteran
Thread Starter
Join Date: Jun 2009
Posts: 5,383
Likes: 0
Received 5 Likes
on
1 Post
Year: 1988 limited
Model: Cherokee
Engine: 4.0 litre
Well I really can't figure out how to post something so I'm doing it this way.
I have a 96 cherokee country. I am installing a budget lift for now but wanting to know if I should get axle shims so I don't get a vibration and if I should install an adjustable track bar so I don't get the death wobble. I drive this truck daily so I want it to still be able to go down the road without all the hassles I have read about. What do I do?
I have a 96 cherokee country. I am installing a budget lift for now but wanting to know if I should get axle shims so I don't get a vibration and if I should install an adjustable track bar so I don't get the death wobble. I drive this truck daily so I want it to still be able to go down the road without all the hassles I have read about. What do I do?
question for ya'll. have a 99 and destroyed my rear quarter panel. darn the luck. anyways will the rear quarters off other years work? want to try my hand at replacing it to see what i can do. that and the rear window behind the door on the other side decided it wanted a tree to come in too. will other years windows work for it too? thanks all.
Hi all - I am working some wiring issues to the door and wondered if anyone knew the manufacturer or part number for the pins and connectors used for the speakers and the power windows? I am interested in rerunning the wires in to the connector housings and not having a splice to get into the connector. Thanks for any hints.
you prolly lost the little clamps that hold the switches in place. Look on the bottom of the door behind the panel.
#377
Seasoned Member
Join Date: Apr 2010
Location: Bloomington, MN
Posts: 440
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 I6
Ok, adding fluid to my differentials(gonna get it changed soon, this is temporary) and I've never done it before. i found the socket on the front one no problem and that seems easy(unscrew fill, close it up). So I look at the rear diff and there is what looks like a rubber plug?! Is this right? If I pull it out what's under it? Is this really all that's holding the oil in the diff? I can see that some oils is leaking from it, should I replace it? Is this something I can pick up at NAPA? What rear diff is this? (96 sport, stock as far as I know) thanks for the help.
edit: Ok I figured out it's a Dana 35, is it limited slip?
edit: Ok I figured out it's a Dana 35, is it limited slip?
Last edited by Anthonyb; 06-02-2010 at 01:27 PM.
#379
Junior Member
i normally have to deppress the gas pedal until the engine warms up in order for it to idle
#380
Another possible issue could be the coolant temp sensor or any temperature related sensors as you say the engine idles fine after it warms up.
I suggest getting a multi-meter if you don't already have one and testing all your sensors one by one.
#381
Senior Member
Join Date: Feb 2010
Location: errrvre where
Posts: 681
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
redrilling the stock trackbar hole for an RE bar
i just bought an adj trackbar from RE for my 4.5 inch lift.. i have to redrill the bracket hole to 5/8ths inch. the tierod is in the way of my drill.. if i drill at an angle the hole will be crooked.. how do i get around the tierod to actualy drill the hole straight.. i tryed jacking up the car but i didnt disco the sway bar and go high up but i probably should have tried that.. i thought i could come here and maybe get an answer.. any suggestions? anyone whos done this before?
#382
Senior Member
Join Date: Mar 2010
Location: Hampton, Virginia
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: none other
Rear quarter panel? do you plan on cutting it out and welding in a new one? because its part of the unibody and can't really be replaced(okay it can, but its stupidly impractical from where I sit) My recommendation for repair would be to get the dents out the best you can and then buy some rear quarter panel armor...there's a reason that at least 3 or 4 different companies make the stuff.
For the window...really any year of the same body style should work.
For the window...really any year of the same body style should work.
the window thats great news i wasnt for sure. ill pick one up then and go to town.
#383
well i was just going to cut the outside of it. companies that make the guards? heck with that i want to build it. this is a built not bought jeep. my last one was a bought not built and it drove me crazy but now i have a welder its on. was just going to cut and put the outside piece in just to have a good body line to follow for the armor.
the window thats great news i wasnt for sure. ill pick one up then and go to town.
the window thats great news i wasnt for sure. ill pick one up then and go to town.
http://www.thor4x4.com/html/xj_corner_guards.html
It'd be really easy to fab up your own version of that. I'd bolt not weld so that if you need to remove it, It'd be fairly easy.
#384
Senior Member
Join Date: Mar 2010
Location: Hampton, Virginia
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: none other
cutting it out isn't worth the hassle IMO. I'd just pull/bang/push the dents out the best I could and the bolt a piece of 1/8th on for a quarter guard and incoporate a new tail light into that. Something along the lines of what THOR4x4 makes...
http://www.thor4x4.com/html/xj_corner_guards.html
It'd be really easy to fab up your own version of that. I'd bolt not weld so that if you need to remove it, It'd be fairly easy.
http://www.thor4x4.com/html/xj_corner_guards.html
It'd be really easy to fab up your own version of that. I'd bolt not weld so that if you need to remove it, It'd be fairly easy.
yeah i was thinking of doing that same thing but adding tube fender flares too. but i dont think 1/8 is going to be enough but 3/16 is probably too much though. my thinking a sheet that big in 1/8 would be a little flimsy, thoughts?
#385
Thor uses 3/16ths and its a good compromise for weight and strength.
#386
CF Veteran
Thread Starter
Join Date: Jun 2009
Posts: 5,383
Likes: 0
Received 5 Likes
on
1 Post
Year: 1988 limited
Model: Cherokee
Engine: 4.0 litre
Ok, adding fluid to my differentials(gonna get it changed soon, this is temporary) and I've never done it before. i found the socket on the front one no problem and that seems easy(unscrew fill, close it up). So I look at the rear diff and there is what looks like a rubber plug?! Is this right? If I pull it out what's under it? Is this really all that's holding the oil in the diff? I can see that some oils is leaking from it, should I replace it? Is this something I can pick up at NAPA? What rear diff is this? (96 sport, stock as far as I know) thanks for the help.
edit: Ok I figured out it's a Dana 35, is it limited slip?
edit: Ok I figured out it's a Dana 35, is it limited slip?
#387
CF Veteran
Thread Starter
Join Date: Jun 2009
Posts: 5,383
Likes: 0
Received 5 Likes
on
1 Post
Year: 1988 limited
Model: Cherokee
Engine: 4.0 litre
i just bought an adj trackbar from RE for my 4.5 inch lift.. i have to redrill the bracket hole to 5/8ths inch. the tierod is in the way of my drill.. if i drill at an angle the hole will be crooked.. how do i get around the tierod to actualy drill the hole straight.. i tryed jacking up the car but i didnt disco the sway bar and go high up but i probably should have tried that.. i thought i could come here and maybe get an answer.. any suggestions? anyone whos done this before?
#388
Member
Join Date: May 2010
Location: Concho,AZ
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
Ok two ?'s can I fit 30x9.50 15's with a 4 backspacing on a stock hight jeep without rubbing,and i want to put an open loop radiator in do i have to change the upper rad crossmember on my 87.