09-21-2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
03-29-2011, 02:24 PM
#4081
☠ CF Sheriff ☠
Hey I want to change my oil pressure sending unit. Will oil come flying out when I remove the old one. Engine is cool know. 
And this is the part I have. Is this the correct one. I know there are two kinds, a switch and a sending unit, however different stores call them different names. thank you.
http://www.amazon.com/Borg-Warner-S4.../dp/B000BZH72S
And this is the part I have. Is this the correct one. I know there are two kinds, a switch and a sending unit, however different stores call them different names. thank you.
http://www.amazon.com/Borg-Warner-S4.../dp/B000BZH72S
I assume you have the oil pressure gauge on your dashboard, thus you need the "switch" - the one with 2 contacts and the oval connector.
Advanced Auto has them for about $22. MUCH better than $41 + shipping
http://shop.advanceautoparts.com/web..._575712842___#
03-29-2011, 07:41 PM
#4083
Senior Member
Join Date: Oct 2010
Posts: 948
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: straight 6
Hey I got a question I just found a really nice Crowl hood for a low price on craiglist it was for a 97-98 would it fit on my 95??? It would look awesome on my jeep. And help would be awesome thanks!
03-29-2011, 09:27 PM
#4087
☠ CF Sheriff ☠
Why the swap? You pretty much have to stick with a jeep transmission. I assume you meant you have the AW-4 tranny right now, which is a very reliable and strong transmission - more than adequate for the 4.0L's power. If your's is shot, just pull one out of any cherokee (they're all the same) and it should bolt right up.
03-29-2011, 09:40 PM
#4088
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
your combination doesn't make sense. Your profile says you have the AX-4 manual tranny and the 4.0L engine, the combination of which never occurred. You mean the aw-4 automatic tranny?
Why the swap? You pretty much have to stick with a jeep transmission. I assume you meant you have the AW-4 tranny right now, which is a very reliable and strong transmission - more than adequate for the 4.0L's power. If your's is shot, just pull one out of any cherokee (they're all the same) and it should bolt right up.
Why the swap? You pretty much have to stick with a jeep transmission. I assume you meant you have the AW-4 tranny right now, which is a very reliable and strong transmission - more than adequate for the 4.0L's power. If your's is shot, just pull one out of any cherokee (they're all the same) and it should bolt right up.
03-29-2011, 09:44 PM
#4089
CF Veteran
Join Date: Feb 2011
Location: Long Beach, Ca
Posts: 3,500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Originally Posted by sycoglitch
Hey dukie hate to hijack someone else post but with your 235/75, do you have 15 or 16" rims. do you get rubbing with those
03-29-2011, 09:52 PM
#4090
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by askingxforxit
I've got 235/75/15 no rubbing issues
03-29-2011, 09:56 PM
#4091
☠ CF Sheriff ☠
keep the outside diameter as close to 235/75R15s and you should be good. Mine don't run at all, even at full stuff on saggy springs
03-29-2011, 10:13 PM
#4092
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by dukie564
keep the outside diameter as close to 235/75R15s and you should be good. Mine don't run at all, even at full stuff on saggy springs
03-30-2011, 08:18 AM
#4093
Registered Users
Join Date: Feb 2011
Location: Baltimore, Maryland
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: Inline 6
Anya has started making a really loud, deep rumbling noise whenever shes in drive. It vibrates the whole vehicle. What could this be?
03-30-2011, 08:20 AM
#4094
☠ CF Sheriff ☠
just when moving? or also when in gear and stopped?
ps - you never took a picture of that body code plate for me
ps - you never took a picture of that body code plate for me
03-30-2011, 11:49 PM
#4095
Registered Users
Join Date: Feb 2011
Location: Baltimore, Maryland
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: Inline 6
Originally Posted by dukie564
just when moving? or also when in gear and stopped?
ps - you never took a picture of that body code plate for me
ps - you never took a picture of that body code plate for me