09-21-2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
12-05-2014, 11:56 PM
Newbie
Join Date: Dec 2014
Location: Tasmania, Australia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Thanks heaps for that. Will adjust the TV cable. Have changed the fluid once already, actually flushed it at the cooler. I've got a TCM coming from ebay, hard to find much in the way of 2nd hand gear here in Aus so it's coming from the states. Thanks again everyone.
12-06-2014, 02:02 AM
Newbie
Join Date: Mar 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Driveshaft bolts
I have a 1996 cherokee sport. When I purchased the jeep the front driveshaft was not installed. I have the driveshaft but no bolts. My question is, where can I find the proper bolts to install the driveshaft? Any information is greatly appreciated.
12-06-2014, 02:18 AM
CF Veteran
Join Date: Feb 2011
Location: Long Beach, Ca
Posts: 3,500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
pull some from an xj at the jy
12-06-2014, 06:23 AM
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 90 Likes
on
74 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
http://stores.revolutionparts.com/mo..._str=6036415AA
12-06-2014, 06:26 AM
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 90 Likes
on
74 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Those circuits are not on the same circuit as the turn signals. And they don't share the same ground.
12-06-2014, 06:29 PM
CF Veteran
Join Date: Feb 2011
Location: Long Beach, Ca
Posts: 3,500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
12-06-2014, 06:37 PM
Newbie
Join Date: Dec 2014
Location: tennessee
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
motor question
Hey guys I'm a newb to this site and bought my first jeep today its a 99 sport 4.0 4-door 5-speed got it for 400 bucks good body and interior just needs a motor they blew head gasket and drove for a while it will start but needs a new motor rod knock its high mileage too. It was built 4/99 still has distributor. I know this has probably been asked a lot but I was wondering what year motors will interchange if I pull my fuel rail manifold etc and swap to new motor. I know I can get a low mileage 96-98 motors at junkyard around home for $ 350. I've swapped motors in other vehicles what is the usual swap time?
thanks for your time!
thanks for your time!
12-06-2014, 06:47 PM
Newbie
Join Date: Dec 2014
Location: tennessee
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Thanks! so if I can find a good 96-99 motor it will be just plug and play swap I don't want to get into swapping heads and stuff I'm ready to drop one in and get out on the trail I just wish I could have put head gasket on this motor and drive but they just let it get way to hot.
12-06-2014, 07:05 PM
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Open your cowl and put a hose in there. Just make sure the drain holes are good an open. Second, inspect the lining around your windshield