Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Member
Join Date: Jul 2010
Location: Georgia
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0L HO from a 91 Comanche.
Hey quick question, I got my driveshaft balanced because of this, but i would like to fix it regardless, at high speed (75 mph) and low load, but not no load, the front driveshaft spins and causes vibrations that are both bad and annoying. I fixed my vacuum engagement on the axle and the diverter switch on the t case, but even balanced and properly disengaged it still vibrates, removing the shaft eliminates the issue, but obviously I'd rather not do that. Any ideas?
CF Veteran
Join Date: Jan 2015
Location: Southern Maryland
Posts: 1,381
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 1999 4.0L
Hey quick question, I got my driveshaft balanced because of this, but i would like to fix it regardless, at high speed (75 mph) and low load, but not no load, the front driveshaft spins and causes vibrations that are both bad and annoying. I fixed my vacuum engagement on the axle and the diverter switch on the t case, but even balanced and properly disengaged it still vibrates, removing the shaft eliminates the issue, but obviously I'd rather not do that. Any ideas?
Junior Member
Join Date: Dec 2012
Location: Tacoma
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
The vacuum harnesses on Renix Jeep 4.0s from 87 to 90 come in 3 kits.
Renix Vacuum Harnesses-Tip 22
The vacuum harness that attaches to the front of the valve cover and includes the grommet/fitting, and is called the front harness, is Napa part number BK 715-1367 or is a Dorman 46003.
The vacuum harness that is closest to the air cleaner, EGR etc, and is called the rear harness, is Napa part number BK 715-1366 or is a Dorman 46004.
The tube from the rear of the valve cover to the intake manifold is part number BK 715-1365 or Dorman 46005 and comes with the valve cover grommet.
Revised 12-28-2014
Renix Vacuum Harnesses-Tip 22
The vacuum harness that attaches to the front of the valve cover and includes the grommet/fitting, and is called the front harness, is Napa part number BK 715-1367 or is a Dorman 46003.
The vacuum harness that is closest to the air cleaner, EGR etc, and is called the rear harness, is Napa part number BK 715-1366 or is a Dorman 46004.
The tube from the rear of the valve cover to the intake manifold is part number BK 715-1365 or Dorman 46005 and comes with the valve cover grommet.
Revised 12-28-2014
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Member
Join Date: Jul 2010
Location: Georgia
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0L HO from a 91 Comanche.
Seasoned Member
Join Date: Dec 2013
Location: SATX
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Thanks. Easier to hit up the right car inventory numbers at the junkyard if I got the right years.
Also trying to source the rebuild kits for 784s. Doesn't look like programbo is providing them anymore so I gotta do for me. Maybe others if possible. Ultrasound cleaning of course.
Also trying to source the rebuild kits for 784s. Doesn't look like programbo is providing them anymore so I gotta do for me. Maybe others if possible. Ultrasound cleaning of course.
Last edited by gigemjeep; 02-16-2015 at 06:33 PM.
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 40 Likes
on
36 Posts
Year: 1999
Engine: 4.0
Thanks. Easier to hit up the right car inventory numbers at the junkyard if I got the right years. Also trying to source the rebuild kits for 784s. Doesn't look like programbo is providing them anymore so I gotta do for me. Maybe others if possible. Ultrasound cleaning of course.
Junior Member
Join Date: Dec 2012
Location: Tacoma
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
anyone have any suggestions for something to spray through a vacuum hose to clean it? Specifically the elbow for the MAP sensor; I know brake/carb cleaner dries the rubber out.
Seasoned Member
Join Date: Dec 2013
Location: SATX
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Junior Member
Join Date: Dec 2012
Location: Tacoma
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
Hi All,
I'm looking into the Cherokee sport 2015. We do a lot of canoe camping and require hooks in the front and back to tie down our canoe.
We are getting the tow package, which means we have a place to tie in the back. Can I have tow hooks installed in the front on this model? I know that option is standard on the Trailhawk. The dealers can't seem to answer my question...
I would be fine just finding a spot under the vehicle like I normally do, but the under carriage is all covered.
Any ideas?
Much Appreciated.
Ron
I'm looking into the Cherokee sport 2015. We do a lot of canoe camping and require hooks in the front and back to tie down our canoe.
We are getting the tow package, which means we have a place to tie in the back. Can I have tow hooks installed in the front on this model? I know that option is standard on the Trailhawk. The dealers can't seem to answer my question...
I would be fine just finding a spot under the vehicle like I normally do, but the under carriage is all covered.
Any ideas?
Much Appreciated.
Ron
In answer to your question, since one model has the capability for tow hooks, you should be able to put tow hooks on the front of any model, but as to how and by whom, I dunno. As a general rule, they put different trim and features on the same frame. There should still be a place to mount the hooks regardless of the trim. From the looks of a quick google search, it seems that there are two square pieces of trim that pop out and the hooks slide in. That's just appearances though. Worst case scenario you'd have to wait for the aftermarket world to catch up to demand and put them on yourself.
Realistically, if the dealership can't answer your questions, perhaps it's time to shop around and find a dealership that does know their product. This seems like a pretty basic question. Possibly ask to talk to one of their technicians, if it's a dealer installed feature, the people that do the work should have some clue as to what is or is not possible (and allowed).
One last thing, the plastic under the front end should pop off fairly easily. It's possible you could pop it off and find your tie down spot, then cut a hole where you need access. Much as we want that stuff to be pointless, it does keep grime out of the engine compartment. I wouldn't recommend just tearing it out. Just cut out a chunk where you need it not to be.
If you do end up getting a new style Cherokee, let us know if it's up to snuff, I for one am curious how they measure up.
Last edited by Ferrel; 02-18-2015 at 12:06 AM. Reason: clarification
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Hi All, I'm looking into the Cherokee sport 2015. We do a lot of canoe camping and require hooks in the front and back to tie down our canoe. We are getting the tow package, which means we have a place to tie in the back. Can I have tow hooks installed in the front on this model? I know that option is standard on the Trailhawk. The dealers can't seem to answer my question... I would be fine just finding a spot under the vehicle like I normally do, but the under carriage is all covered. Any ideas? Much Appreciated. Ron
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
I hate to say it, but the new Cherokees are more closely related to Subaru foresters than the older Cherokees (1984-2001), which this site is pretty much devoted to. The older Cherokees sit on a frame that is closer to a truck frame. The new ones are (supposedly) very well built crossovers. The drive train is completely different. Basically they brought back the Cherokee name because they wanted to tap into the cult following the older Cherokees has gathered.
Since one model has the capability for tow hooks, you should be able to put tow hooks on the front of any model, but as to how and by whom, I dunno. As a general rule, they put different trim and features on the same frame. There should still be a place to mount the hooks regardless of the trim. From the looks of a quick google search, it seems that there are two square pieces of trim that pop out and the hooks slide in. That's just appearances though. Worst case scenario you'd have to wait for the aftermarket world to catch up to demand and put them on yourself.
Realistically, if the dealership can't answer your questions, perhaps it's time to shop around and find a dealership that does know their product. This seems like a pretty basic question. Possibly ask to talk to one of their technicians, if it's a dealer installed feature, the people that do the work should have some clue as to what is or is not possible (and allowed).
One last thing, the plastic under the front end should pop off fairly easily. It's possible you could pop it off and find your tie down spot, then cut a hole where you need access. Much as we want that stuff to be pointless, it does keep grime out of the engine compartment. I wouldn't recommend just tearing it out. Just cut out a chunk where you need it not to be.
If you do end up getting a new style Cherokee, let us know if it's up to snuff, I for one am curious how they measure up.
Since one model has the capability for tow hooks, you should be able to put tow hooks on the front of any model, but as to how and by whom, I dunno. As a general rule, they put different trim and features on the same frame. There should still be a place to mount the hooks regardless of the trim. From the looks of a quick google search, it seems that there are two square pieces of trim that pop out and the hooks slide in. That's just appearances though. Worst case scenario you'd have to wait for the aftermarket world to catch up to demand and put them on yourself.
Realistically, if the dealership can't answer your questions, perhaps it's time to shop around and find a dealership that does know their product. This seems like a pretty basic question. Possibly ask to talk to one of their technicians, if it's a dealer installed feature, the people that do the work should have some clue as to what is or is not possible (and allowed).
One last thing, the plastic under the front end should pop off fairly easily. It's possible you could pop it off and find your tie down spot, then cut a hole where you need access. Much as we want that stuff to be pointless, it does keep grime out of the engine compartment. I wouldn't recommend just tearing it out. Just cut out a chunk where you need it not to be.
If you do end up getting a new style Cherokee, let us know if it's up to snuff, I for one am curious how they measure up.
https://www.cherokeeforum.com/f87/