sycoglitch

Has anyone ran the puma a/t from treadwright. I know they Are retreads but I need new tires soon and I wanna run these for a year or two. They will mostly see highways driving and occasional light offloading nothin too aggressive.

Edit: oh and how do they handle in rain slick roads and snow but most importantly is that kedge grip worth it

Irhall93

hahaha, ok, thank you both =)

vg66baller

If anyone could help it would be greatly appreciated... first of all I have a 1988 jeep cherokee 4x4 automatic with an inline 6.... this baby only runs when she wants to...sometimes it will fire up..than sometimes it wont start for months....recently it has been starting up without a problem..than I was gonna take her out fir a spin (she's not my daily driver) seems like she knows...she wont start.....I know when it will start because I will hear the ignition or fuel pump engage for a couple seconds. If I don't hear that I know it wont start....when I hear it engage she works like a charm...when it doesn't. I don't have spark or fuel....????? I've changed the cps on the bell housing tried to bypass the fuel pump but still nothing .......any suggestions??? Oh btw does this year jeep come with an alarm....I've noticed a clifford alarm almosts looks like a kill switch underneath the dash...do you think it might be related to this issue???... any answers would be greatly appreciated...Thx

Customizer1000

Yes cliffords have ignition cut out

Jason95xj

would an overhead console from a 96 be able to bolt right up to the lormal locations in my 95? i have the brackets and everything just not the harness only the ends

XJ JoeyD

Torque spec for the tie rod end on drag link to Pittman arm? Have zj steering conversion if that makes a difference. Thanks

vg66baller

How can I bypass the cliffiord alarm or remove it....I haven't seen an alarm brain...it has a fuse and like a rod with a handle like a kill switch??? Any suggestions

Customizer1000

being an installer I find it easy u may not, take the plastic off from steering down on the drivers side, find where all the wires attatch and remove them,

baloozabub

i am getting a hesitation/engine backfire every now and again while depressing the gas pedal. i have new plugs, wires, dist. and have cleaned the throttle body very good. has anyone else had this problem and how did you fix it? ('98 Jeep XJ Sport)

vg66baller

Thx....ill check it out..sounds easy enough...do you know normally how many wires...and do they malfunction like that....will that completely disconnect it?

Irhall93

I am trying to change the high pressure hose on my jeep but i cant get to where it connects to the steering box down below. I want to remove the black box that is to the right of the power steering pump so i can get access to it, i think the box is the airbox. Is it? Is that a good way to get acess to the power steering hose nut? and how do i remove or just move the black box?

donkeypunch

Maybe my search 'terms' aren't correct but I can't seem to find a solution.
My steering hops when turning as if I'm in 4wd. The selector is in 2wd and it's definitely not giving power to the front wheels. But any amount of turning gives that wheel hop and steering wheel jerk. 4wd works perfectly fine when the selector is in 4wd although the 'part time' light stopped coming on. Any suggestions?

96xjclassic

Take off the cover,remove Air filter& there should be 2 or 3 bolts underneath remove those and you are good to go.

There is a great write-up on making sure your part time light works, you should check it out! As far as your steering issue, Im not really sure. Maybe check your power steering fluid level? If not equipt then Im not sure.

mikjensen

Is there a need to use new head bolts when you swap heads? I am putting a 94 block in my 2000 XJ and going to use my 2000 head, intake, exhaust, etc.

Customizer1000

Yes most are stretch bolts