XJwonders

is it same size as the trans hanger mount? U could buy that and use it in the back.

TFitzPat87

Looks to be, but I'd have to check. I thought about that, but it's riveted to the bracket that bolts to the frame rail, so I can't just swap it out. That was actually my initial thought until I realized it was riveted.

TFitzPat87

Actually, the exhaust hanger at the crossmember looks the same (riveted). What part do I need to replace that mount as well? I want to replace them all at the same time. Do I need to replace the entire plate thats sandwiched between the trans and trans mount?

BubbaWilcox

I'm replacing my front D30 axle with one from a junkyard (car accident). I am replacing the ball joints, UCA bushings, wheel hub/bearing assembly, U-joints , as well as changing the fluid. Is there anything I'm missing? I'd like to just change everything now and not deal with it once it is on the car. Also, is it necessary to replace the inner axle seals? I have looked up how to do it some and it seems too involved for my level of competency with working on cars.

Ol'Muley

Everything else is easy, as long as the gear ratios match front to rear

NewKindOfClown

I'd throw new ujoints and brake parts on it while you're in there

Basslicks

Hell, throw a set of these in there if you're trying to be thorough

http://www.4wheelparts.com/Drivetrai...L0waAiQC8P8HAQ

JeepTrick68

I've seen these mentioned before. Are they really necessary or just added insurance? I haven't been able to find any reviews about them.

Basslicks

Added insurance/necessary depending on what you do or don't want getting into your axle tubes. If you wheel it, it will help keep out dirt, dust, and especially water from your tubes... plus, if it were me and I lived in the rust belt, I'd put these on to help keep the nasty salt from rusting the housings from the inside out.

I plan on getting a set for mine. 55 bucks is cheap insurance, IMO.

JeepTrick68

I'll be replacing my hubs, ball joints, u-joints, etc. Think I'll order a set. this snow, slush, and salt does enough damage as it is.

Basslicks

Good call.

JeepTrick68

Just watched a video on youtube about the install of these seals. Looks like the only thing that holds them in place is silicone. Doesn't seem that secure. Is that all it needs?

89 comanche

A sae socket or boxwrench fit on those bolts, I just pulled one today in the filth at u pull it. Something/32nds. I don't know which because I throw all my tools in a bucket and am too tired to sort them now.

89 comanche

I sell non ripped seats for $40 cloth no tracks to $100 nice leather per pair with tracks.

89 comanche

Is this some old alarm system part or something important? Yellow box bigger than a deck of cards, down above the drivers left foot with wires coming out the back. 90 4 liter renix cherokee 4x4 auto.