Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 13 Likes
on
12 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Ran every number I could find on the pump itself, and none of then returned anything
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 13 Likes
on
12 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
I just checked the fuel pump on Rock Auto, and I agree. Thanks, guys. I bought a shelving unit today so I can finally clean up and get organized. I'll go ahead and mark it as '97-01 XJ 2.5L/4.0L applications. Summit Racing agrees.
Ran every number I could find on the pump itself, and none of then returned anything
Ran every number I could find on the pump itself, and none of then returned anything
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
CF Veteran
Join Date: Mar 2012
Location: Quebec
Posts: 1,024
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0L
are water streaks inside the windshield normal or a sign that the seal is going bad? I noticed them due to my window fogging up, so i cleaned it and now 2-3 weeks later it's full of vertical streaks again. they go from top to bottom but i never see it leaking when driving, even in heavy rain.
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 90 Likes
on
74 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
And I was told this is a Renix cruise control motor. Does it look Jeepy?
Attachment 296461
Attachment 296462
Attachment 296463
Attachment 296461
Attachment 296462
Attachment 296463
This looks kind of like it.
http://www.ebay.com/itm/1989-JEEP-CH...RX1OKK&vxp=mtr
Last edited by CCKen; 11-22-2016 at 01:17 PM.
Member
Join Date: Feb 2014
Location: Virginia
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Head gasket?
My jeep runs great, but my new radiator is bubbling and sprays out of the cap after driving for a while, also have some smoke on start up which looks like coolant. Other than a crack in the block/head it's likely a head gasket right?
I don't mind changing it, just wanted to check if there was anything else that could cause these symptoms before I started buying testers and gaskets. (I've bought some trucks that needed "head gaskets" and just had to change the intake gasket.)
I don't mind changing it, just wanted to check if there was anything else that could cause these symptoms before I started buying testers and gaskets. (I've bought some trucks that needed "head gaskets" and just had to change the intake gasket.)
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
My jeep runs great, but my new radiator is bubbling and sprays out of the cap after driving for a while, also have some smoke on start up which looks like coolant. Other than a crack in the block/head it's likely a head gasket right?
I don't mind changing it, just wanted to check if there was anything else that could cause these symptoms before I started buying testers and gaskets. (I've bought some trucks that needed "head gaskets" and just had to change the intake gasket.)
I don't mind changing it, just wanted to check if there was anything else that could cause these symptoms before I started buying testers and gaskets. (I've bought some trucks that needed "head gaskets" and just had to change the intake gasket.)
CF Veteran
Join Date: Mar 2012
Location: Quebec
Posts: 1,024
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0L
here's one...
on my new tie rod i'm worried that i didn't check the box well enough before i threw it away. I think I'm missing a boot/castle nut/kotter pin on the passenger end of the tie rod.
can you guys confirm i'll need a boot/nut/pin for that end? and bonus points for a link to buy?
on my new tie rod i'm worried that i didn't check the box well enough before i threw it away. I think I'm missing a boot/castle nut/kotter pin on the passenger end of the tie rod.
can you guys confirm i'll need a boot/nut/pin for that end? and bonus points for a link to buy?
http://www.energysuspension.com/univ...ust-boots.html
if you ordered through rockauto (probably any other website have similar policies) you could try to report a problem on your order and specify a boot was missing, they'll probably send you a new one (they did for me when a brake hose missed the copper gaskets, no questions asked)
never used them myself but check out this link
http://www.energysuspension.com/univ...ust-boots.html
if you ordered through rockauto (probably any other website have similar policies) you could try to report a problem on your order and specify a boot was missing, they'll probably send you a new one (they did for me when a brake hose missed the copper gaskets, no questions asked)
http://www.energysuspension.com/univ...ust-boots.html
if you ordered through rockauto (probably any other website have similar policies) you could try to report a problem on your order and specify a boot was missing, they'll probably send you a new one (they did for me when a brake hose missed the copper gaskets, no questions asked)
interestingly there's no boot pictured in what comes with the rod...
CF Veteran
Join Date: Oct 2015
Posts: 7,409
Likes: 0
Received 1,555 Likes
on
1,195 Posts
Year: 2000
Model: Cherokee (XJ)
here's one...
on my new tie rod i'm worried that i didn't check the box well enough before i threw it away. I think I'm missing a boot/castle nut/kotter pin on the passenger end of the tie rod.
can you guys confirm i'll need a boot/nut/pin for that end? and bonus points for a link to buy?
on my new tie rod i'm worried that i didn't check the box well enough before i threw it away. I think I'm missing a boot/castle nut/kotter pin on the passenger end of the tie rod.
can you guys confirm i'll need a boot/nut/pin for that end? and bonus points for a link to buy?
the part that i think is missing a boot is the bit that goes into the center of the drag link. perhaps someone here knows if that connection requires a boot or not?