Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Join Date: Jul 2013
Posts: 1,149
Likes: 0
Received 35 Likes
on
24 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Clean and prep all the metal thoroughly, and knock down any rust you find. Once this is done, couple of good products out there.
POR15
Eastwood Chassis Black frame paint.
Any good bedliner(applied, not rattlecan)
With any of these, but especially the bedliner, good idea to run all your screws/bolts in halfway before applying product. This not to keep your bolts nice, lol, but makes re-installing seats, belts, console, etc much MUCH easier. Running bolts into holes with gummed up threads is not fun.
POR15
Eastwood Chassis Black frame paint.
Any good bedliner(applied, not rattlecan)
With any of these, but especially the bedliner, good idea to run all your screws/bolts in halfway before applying product. This not to keep your bolts nice, lol, but makes re-installing seats, belts, console, etc much MUCH easier. Running bolts into holes with gummed up threads is not fun.
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I'd be nervous about putting POR-15 on a unibody floor. If you wheel it hard enough, it might crack from the stress. That's only an idea, though; not something I have experienced. Someone has probably done it and can share their results.
Rear suspension tracking
I have a 97 with stock suspension. It has a chronic pull to the right. The other day i noticed the right rear is sagged lower than the left by 3/4 inch! Is that effecting my rear tracking geometry? It makes sense that it would be designed in to have the rear axle pivot toe left under left turn loading.
Thanks
Rick
Thanks
Rick
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
No, I don't lick fish.
Didn't Dukie do POR15 on the floor or was that Chasis Saver?
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Senior Member
Junior Member
Join Date: Dec 2012
Location: Tacoma
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
I have an ax15 that I'm getting ready to rebuild and was wondering if you guys know any good sources for a rebuild kit. Money's always tight so I don't want to pay double for the same quality parts... Sorry if there's threads about this, I did a quick search and didn't see anything promising. Thanks in advance.
CF Veteran
Junior Member
Join Date: Dec 2012
Location: Tacoma
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
You looked here?
http://www.rockauto.com/en/catalog/
http://www.rockauto.com/en/catalog/
CF Veteran
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by cruiser54
What are the readings? Always more positive caster in the right side to compensate for the road crown.
Beach Bum
From numerous sources including Chrysler, I discovered the passenger side wheelbase is up to 10mm shorter than driverside. I compensated for this when dialing in adjustable control arms.