Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
#7247
Does anyone know what else the third bullet connector is for besides the rear wiper because that keeps shorting out my parking lights fuse, also the license plate lamp is not connected could that cause the problem?
#7249
Member
Join Date: Aug 2011
Location: Vancouver, BC
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
They're difficult but doable. Takes some wrangling to get in there and maneuver your wrench. Use a universal and extensions if you're having too much trouble.
If you have the equipment, release the left hand motor mount and lift the engine. You'll only get a few inches but that's usually enough.
If you have the equipment, release the left hand motor mount and lift the engine. You'll only get a few inches but that's usually enough.
#7250
Junior Member
Join Date: Sep 2011
Location: ocala fl
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
do both of you have bigger than stock size tires? do both of you have a new speedo gear to compensate for them tires so that your odometer reads correctly? if not then you might be off on what your thinking your getting vise what your actually getting for MPGs. just a thought.
#7251
Originally Posted by LoveMy89Anya
how in the world does one reach the lower 4 intake/exhaust manifold bolts? i cant reach them...
#7252
Senior Member
Join Date: Mar 2010
Location: Hampton, Virginia
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: none other
#7253
Member
Join Date: Aug 2009
Location: Littleton, CO
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
I have a question. I replaced all the TRE on my jeep and did the control bushings as well. I didn't have dw before this. I got it aligned, drilled the track bar axle bushing to use a 7/16 bolt to make it tighter. It doesn't have dw anymore and if the road is mostly smooth it is perfectly smooth no vibes at all even at 75 mph. But the issue is if one tire hits a bump the steering wheel shimmys for a second. Would a loose steering box cause this? Thanks!
#7254
Thank you for creating this, I must have spent an hour trying to figure out how to post a question on here. I just bought my first jeep, a 92 cherokee 4.0L, and I have a squeak that is driving me CRAZY. It only makes the noise when I am in drive, and slowing down to a stop. when approaching a stop, the noise starts before I even hit the brakes, and it continues until a complete stop is reached. I have greased the driveshaft and u-joint inserts, and it still continues. can anybody point me in the proper direction in what I need to do to figure this squeak out? any good ideas will be greatly appreciated. Is this a common issue with the cherokee, also?
#7255
::CF Administrator::
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,042
Received 236 Likes
on
188 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Originally Posted by onemeantexan
Thank you for creating this, I must have spent an hour trying to figure out how to post a question on here. I just bought my first jeep, a 92 cherokee 4.0L, and I have a squeak that is driving me CRAZY. It only makes the noise when I am in drive, and slowing down to a stop. when approaching a stop, the noise starts before I even hit the brakes, and it continues until a complete stop is reached. I have greased the driveshaft and u-joint inserts, and it still continues. can anybody point me in the proper direction in what I need to do to figure this squeak out? any good ideas will be greatly appreciated. Is this a common issue with the cherokee, also?
#7257
☠ CF Sheriff ☠
Thank you for creating this, I must have spent an hour trying to figure out how to post a question on here. I just bought my first jeep, a 92 cherokee 4.0L, and I have a squeak that is driving me CRAZY. It only makes the noise when I am in drive, and slowing down to a stop. when approaching a stop, the noise starts before I even hit the brakes, and it continues until a complete stop is reached. I have greased the driveshaft and u-joint inserts, and it still continues. can anybody point me in the proper direction in what I need to do to figure this squeak out? any good ideas will be greatly appreciated. Is this a common issue with the cherokee, also?
Does it do it when coasting in neutral?
Does it do it when you speed up also?
Is it speed dependent (speed of the squeak that is)?
Does it get louder when you turn one way or the other?
#7258
Left taillight out....UGHHH
So...I went browsing thru out a bunch of threads and the search bar and only found problems vaguely similiar to mine. I have a 98 cherokee, and the left tail light is out, the break lights are still functioning. I've checked all the bulbs and fuses. Also there are a few other problems, such as my driver side door panel speaker doesn't work, the left side blinkers blink faster.
#7259
Member
Join Date: Aug 2011
Location: Vancouver, BC
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
So...I went browsing thru out a bunch of threads and the search bar and only found problems vaguely similiar to mine. I have a 98 cherokee, and the left tail light is out, the break lights are still functioning. I've checked all the bulbs and fuses. Also there are a few other problems, such as my driver side door panel speaker doesn't work, the left side blinkers blink faster.