09-21-2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
12-18-2011, 12:03 PM
#8612
Seasoned Member
Join Date: Aug 2010
Location: Ashburn, VA
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by 95Cherokeedude
I have a 95 cherokee with a NP-231 T-case and a 3 inch RC lift. I replaced the rear output seal 3 times, replaced extension housing, got an new ceramic coated slip yoke and the damn thing is leaking again. The lift never came with axle shims and i wonder if this is the problem?? I was also contemplating a T-case drop and maybe the the axle shims as an SYE alternative.. I seem to be the only guy with the seal leaking issue??? As for vibes they don't bother me. I just want to stop leaving oil all over the adirondacks!!! Anyone else out there in the same boat?? what do I do??
12-18-2011, 03:28 PM
#8614
CF Veteran
Join Date: Nov 2010
Location: some small town oregon
Posts: 15,581
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by bsmith97xj
Can I just drill new holes for rear upper shackle to correct the poor angle?
12-19-2011, 06:11 PM
#8616
Newbie
Join Date: Jun 2009
Location: LI, New York
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Hey I have an 01 Cherokee with about 179,000 on it, the turn signals stopped flashing but go on, same with hazards replaced bulbs, didn't fix it, and can turn signal on with key off no power, can this be a short in multifuncion switch?
12-19-2011, 08:04 PM
#8618
Junior Member
Join Date: Nov 2011
Location: the up eh!
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89' 92'
Model: Cherokee
Engine: 4.0
coil bucket measurements.
anyone know off hand or that could measure center to center for me on the coil buckets. again my jeep is 4/5 hours away. thanks.
12-19-2011, 09:10 PM
#8619
Newbie
Join Date: Jul 2011
Location: Jax, FL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
EGR Valve
Hi there. Noob question, but I have a 2001 WJ whose engine just blew. In ordering another, the question has come up whther i have an EGR valve or not. I've searched EGR, ERG Valve, etc, the forum indicates that "The following words are either very common, too long, or too short and were not included in your search: EGR". So I'm having some trouble locating an image or spec or anything that would help me locate the EGR valve on my WJ. I can't even find a decent google image of what or where the EGR would be. HALP! And thanks in advance.
12-20-2011, 12:28 PM
#8620
Senior Member
Join Date: May 2010
Location: MI 48642
Posts: 882
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
Hi there. Noob question, but I have a 2001 WJ whose engine just blew. In ordering another, the question has come up whther i have an EGR valve or not. I've searched EGR, ERG Valve, etc, the forum indicates that "The following words are either very common, too long, or too short and were not included in your search: EGR". So I'm having some trouble locating an image or spec or anything that would help me locate the EGR valve on my WJ. I can't even find a decent google image of what or where the EGR would be. HALP! And thanks in advance.
12-20-2011, 02:54 PM
#8621
Seasoned Member
Join Date: Jun 2011
Location: Wichita
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
Id go to ur local dealership. They look up diagrams and stuff for me. Should be able to actual take ur vin in and ask them to look up wether it has one or not
12-20-2011, 02:55 PM
#8622
Seasoned Member
Join Date: Jun 2011
Location: Wichita
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
Curiosity makes me wonder. I cleaned my iac today but how does something so far from the combustion chamber get carbon deposits on it
12-20-2011, 03:33 PM
#8623
CF Veteran
Join Date: Nov 2010
Location: chillicothe, OH
Posts: 2,139
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0
Bump.
91 xj with 3" rc lift lookin for new uca's. Dont need to be adjustable. Any suggestions???
Should i just replace w new stock ones or????
91 xj with 3" rc lift lookin for new uca's. Dont need to be adjustable. Any suggestions???
Should i just replace w new stock ones or????
12-20-2011, 09:12 PM
#8624
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Has anyone used plasti dip. So i need to sand down first like with paint or can I go right over it with several coats. And how is plasti dip with mud and snow and stuff
12-20-2011, 09:33 PM
#8625
CF Veteran
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
I'd try replacing the flasher relay first, then move to multifunction stick.