Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Join Date: Aug 2011
Location: Lehigh Valley, Pennsylvania
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 stroked to 4.6, Thanks to Teasdale'sMachine!
Originally Posted by scott1757
Hello all quick question, I've searched and searched and can't find the answer, I'm replacing my push Rods (4.0 HO 1993 7120 head, all stock) I can't seem to find a stock length pushrod, mine measure 9.625 inches, all aftermarket measure 9.641" can anyone clear this up for me? can I replace my rods with the 9.641" rods or do I need to find 9.625" rods. Thanks !
Seasoned Member
Join Date: Dec 2011
Location: Springfield, MA
Posts: 372
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0
Hello all quick question, I've searched and searched and can't find the answer, I'm replacing my push Rods (4.0 HO 1993 7120 head, all stock) I can't seem to find a stock length pushrod, mine measure 9.625 inches, all aftermarket measure 9.641" can anyone clear this up for me? can I replace my rods with the 9.641" rods or do I need to find 9.625" rods. Thanks !
☠ CF Sheriff ☠
Hello all quick question, I've searched and searched and can't find the answer, I'm replacing my push Rods (4.0 HO 1993 7120 head, all stock) I can't seem to find a stock length pushrod, mine measure 9.625 inches, all aftermarket measure 9.641" can anyone clear this up for me? can I replace my rods with the 9.641" rods or do I need to find 9.625" rods. Thanks !
Member
Join Date: Apr 2012
Location: Bloomfield, Mi
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 6 Cylinders S 4.0L MFI
I just replaced the REAR wiper arm and Wiper blade and I can't remember how the hose goes back on the wiper. I have it connected to the arm, but I just can't remember how to make it so it shoots on the window. Can anyone help me out? Pictures work great if not. Snap a picture of your rear wiper for me. Thanks in advance.
Junior Member
Join Date: Oct 2011
Location: Rome NY, by way of Myrtle Beach SC
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
No crank swap, as far as I know completely stock, replacing the head gasket and it was cheaper to get a new hew than have a valve job done. well it was close enough in price and faster just figured I'd replace the rods as well.
Junior Member
Join Date: Oct 2011
Location: Rome NY, by way of Myrtle Beach SC
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
☠ CF Sheriff ☠
Bridges J3236513
Pivots J3235090
Rocker Arms J3242393
you should replace the lifters (tappets) at the same time as the pushrods though - they're a matched set
J3222276
☠ CF Sheriff ☠
I just replaced the REAR wiper arm and Wiper blade and I can't remember how the hose goes back on the wiper. I have it connected to the arm, but I just can't remember how to make it so it shoots on the window. Can anyone help me out? Pictures work great if not. Snap a picture of your rear wiper for me. Thanks in advance.
Member
Join Date: Apr 2012
Location: Bloomfield, Mi
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 6 Cylinders S 4.0L MFI
Junior Member
Join Date: Oct 2011
Location: Rome NY, by way of Myrtle Beach SC
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
Haha thanks brother, ive been searching for a week thanks for the advice on the lifters too, beer is in the mail LOL
Newbie
Join Date: Mar 2012
Location: williamston sc
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Newbie here with a question im sure yall can answer.Just bought a 1998 cherokee classic with quite a few factory options but have no history.Want to know how to find out if it has remote door locks,and the gauge cluster lights dont work.Have replaced the bulbs and the headlight switch with no luck.Any help would be greatly appriciated.
Seasoned Member
Join Date: Dec 2011
Location: Springfield, MA
Posts: 372
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0
damn maybe i should just ask you then, do you know of any wright up for the 4.5 stroker? i've searched but i cant get specifics on part numbers and what not for the 4.2 rotating assembly conversion.
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by jabo68
Newbie here with a question im sure yall can answer.Just bought a 1998 cherokee classic with quite a few factory options but have no history.Want to know how to find out if it has remote door locks,and the gauge cluster lights dont work.Have replaced the bulbs and the headlight switch with no luck.Any help would be greatly appriciated.
☠ CF Sheriff ☠
Here's a 4.5L
http://www.jeepstrokers.com/forum/vi....php?f=8&t=645
Banned
Join Date: Feb 2012
Location: Ohio
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l i6
Today I noticed that when I started my jeep there was some water dripping out of the tail pipe and in about 5 minutes there was a small puddle about 2 inches in diameter... It was also running a little rough today. For instance the rpms dropped just a little while waiting on a traffic light (happened twice) anyone have any answers? This is the first time it had happened. It's a 99 2wd btw. Thanks!