bloddy mud

94xjsport94: light **** isnt turned all the way. its in the dash dimmer right now. all the light switches are off and when you put the bulb in ether of the light things it still comes on. allmost like the loghts are wired hot

avision

What do you guys think about attaching some boxed 6x9 to the roof behind the front seats?

NewKindOfClown

Standard practice for that is to get a soundbar and mount it behind the seats. It will fit 6.5s easily.

bloddy mud

idk hit a bump and suffer head injuries due to a fallen speaker? lol

avision

Yeah was going to go the sound bar route but all the ones at the jy here are all falling apart and I already have the 6x9s in boxes.

I would be attaching them with bolts and L brackets so I don't think they would fall off, but I see your point.

Anyone know of an aftermarket XJ sound bar?

DieselD

Thanks. Its funny I was Googling the issue and found that. Its bookmarked!

I'll hopefully tackle the issue tmrw... and post what happened.

avision

I just found a sound bar from teamcherokee.com, but they want $125 bucks! no thanks.

ol"blue

I had a better write-up but lost all my files when my computer crashed and I had to start all over again. Oh well...

avision

What about attaching them to the back of the back seat? Is the back made out of wood?

a_shirey

same problem in my 96. no clue as to why.

MR E30

I have a question, tried to search but found nothing of use.

What would cause extremely sloppy steering, before the steering box, but tight and solid steering components after the box?

I can reach and wiggle the steering input shaft into the steering box with ease, and nothing on the other side moves.

Is this a bad steering box?

TIA

wiggles

Sound like it is pretty worn and could use replacing

sycoglitch

I don't know of its the who back buy I know at least, the back of the rear seat more towards the passenger side, I have tie downs I screwed into the seat so as to have a point of support to hold my tools in place

avision

I ended up just bolting it to the rear floor boards against the edges sideways so there is still leg room. I will have to take the bench out to fold the rear seat down, but it's worth it to have tunes with doors off.

cwabney

Have you tried tightening the worm gear on your steering box? It's a quick test & solved a similar problem on my '01.

A few minutes of searching the forum should bring up a good explanation of how this is done.