XJ Stalls Under Light Accelleration
#1
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
XJ Stalls Under Light Accelleration
My jeep has stalled twice now in the past couple days. Each time, I was accellerating. The engine idles and cruises fine. I can shift into neutral and restart the engine without and issue while still rolling.
Also, the transmissions shift points seem to change a bit lately. One morning it wouldn't shift out of first until the engine hit 3000rpm under light throttle application.
Am I wrong in blaming the TPS for both issues, or do they seem like two separate issues?
Also, the transmissions shift points seem to change a bit lately. One morning it wouldn't shift out of first until the engine hit 3000rpm under light throttle application.
Am I wrong in blaming the TPS for both issues, or do they seem like two separate issues?
#6
CF Veteran
yeah... fuel pressure would be next to rule in or out. Just make sure to test not only at idle, but driving too... including accel and decel as well.
#7
My jeep has stalled twice now in the past couple days. Each time, I was accellerating. The engine idles and cruises fine. I can shift into neutral and restart the engine without and issue while still rolling.
Also, the transmissions shift points seem to change a bit lately. One morning it wouldn't shift out of first until the engine hit 3000rpm under light throttle application.
Am I wrong in blaming the TPS for both issues, or do they seem like two separate issues?
Also, the transmissions shift points seem to change a bit lately. One morning it wouldn't shift out of first until the engine hit 3000rpm under light throttle application.
Am I wrong in blaming the TPS for both issues, or do they seem like two separate issues?
We apologize for the inconvenience you're experiencing with your Jeep. It sounds like you're just looking for advice but if you decide you'd like to have the dealer take a look, let us know. Our team is available via direct message and would be happy to help.
Jasmine
Jeep Social Care Specialist
Trending Topics
#8
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#9
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
The fuel filter has been on my mind for a while since I've never changed it, but there's no hesitation at all. The FPR was new in January.
#10
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Whaddya mean TPS open?
Ever indexed your distributor? Looked inside the cap lately?
Ever indexed your distributor? Looked inside the cap lately?
#11
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
I have never indexed the distributor. I'm not really sure what all that entails. I'll pop the cap off this morning and see if it needs to be cleaned up.
#12
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#13
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
The rotor and contacts in the distributor were pretty crusty. I cleaned them up, but I will still get a new set.
I'll check out tip 13 when I get a little later when i have time.
I'll check out tip 13 when I get a little later when i have time.
#14
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
Looks like checking out the distributor will need to wait until Friday when I have the day off. I'll be getting a new cap and rotor, too. I don't have a vise. Will that be an issue?
#15
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
You can get by without a vice. Be sure you need indexing frst. Plugs and plug wires?