Yoke nut. Chrysler 8.25...
#1
Member
Thread Starter
Join Date: May 2018
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Yoke nut. Chrysler 8.25...
I can't get out a bolt that sheared inside the pinion yoke, when I was removing the axle for my disc brake conversion. It seems now, like I have no choice but to take the yoke out, and either have a professional remove it, or just buy a new yoke. Either way, I need to know what size bolt that is. And how do I keep it from spinning so I can get it loose? It looks like at LEAST a 30mm bolt, which in my mind means it won't come off easily.
#3
Senior Member
Join Date: Mar 2016
Location: Oklahoma
Posts: 621
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L L6 PowerTech (stock)
I maybe confused. Are you saying that you removed the nut holding the onion and the threaded shaft of the pinion snapped? If the head of a bolt from the straps on the your snapped, then I would imagine that the bolt spinning would be a problem.
If it is the first one, then you'd have to remove the pinion from within the differential. If it is the second, then try to follow this thread. https://www.cherokeeforum.com/f2/need-help-broken-drive-shaft-bolt-how-extract-249747/
Post again to let us know which stratagem that you decided to try and the results. Also, post any additional questions provided that the other thread doesn't resolve this for you.
If it is the first one, then you'd have to remove the pinion from within the differential. If it is the second, then try to follow this thread. https://www.cherokeeforum.com/f2/need-help-broken-drive-shaft-bolt-how-extract-249747/
Post again to let us know which stratagem that you decided to try and the results. Also, post any additional questions provided that the other thread doesn't resolve this for you.
#5
Member
Thread Starter
Join Date: May 2018
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
I maybe confused. Are you saying that you removed the nut holding the onion and the threaded shaft of the pinion snapped? If the head of a bolt from the straps on the your snapped, then I would imagine that the bolt spinning would be a problem.
If it is the first one, then you'd have to remove the pinion from within the differential. If it is the second, then try to follow this thread. https://www.cherokeeforum.com/f2/nee...xtract-249747/
Post again to let us know which stratagem that you decided to try and the results. Also, post any additional questions provided that the other thread doesn't resolve this for you.
If it is the first one, then you'd have to remove the pinion from within the differential. If it is the second, then try to follow this thread. https://www.cherokeeforum.com/f2/nee...xtract-249747/
Post again to let us know which stratagem that you decided to try and the results. Also, post any additional questions provided that the other thread doesn't resolve this for you.
#7
CF Veteran
Although IIWM I'd use a pipe wrench and a BF pipe instead of a come-along.
Do you have good quality drills?
Do you have good quality drills?
Last edited by Dave51; 02-25-2019 at 09:37 AM.
Trending Topics
#8
Member
Thread Starter
Join Date: May 2018
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Also, my axle isn't in the truck. It's taken out, so I can do my disc brake conversion.
#9
CF Veteran
OK you need some good titanium bits. Cheap bits are made for wood and thin aluminum and that's about it.
AND NOT FROM HARBOR FREIGHT!!!!!!
AND NOT FROM HARBOR FREIGHT!!!!!!
#10
CF Veteran
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,700
Received 236 Likes
on
209 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
Like Dave suggested, you need some good sharp bits. Metal drilling is best done at slower speeds. Put the cordless drill on the charger and go to your local hardware store. You want the Cobalt bits. They will say right on the package they are for drilling hard metal.
You'll be amazed at the difference when you put a fresh drill bit on it.
#11
Senior Member
Join Date: Mar 2016
Location: Oklahoma
Posts: 621
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L L6 PowerTech (stock)
"I was removing the axle"
That made me think that the axle was still connected to the vehicle since you had a problem. I figured that you hadn't completed the removal. If it was still attached, then it would not spin because turning the yoke would move the wheels in turn, but there would still be some slop while the drill whirls.
How much is a new yoke? How much is a quote from machine shop to remove and re-tap?
Depending on how your vise is mounted you might be able to throw the whole thing across the table and hold the yoke in a vice.
That made me think that the axle was still connected to the vehicle since you had a problem. I figured that you hadn't completed the removal. If it was still attached, then it would not spin because turning the yoke would move the wheels in turn, but there would still be some slop while the drill whirls.
How much is a new yoke? How much is a quote from machine shop to remove and re-tap?
Depending on how your vise is mounted you might be able to throw the whole thing across the table and hold the yoke in a vice.
#12
Member
Thread Starter
Join Date: May 2018
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
A simple corded drill will give you a ton more power than a cordless -- however, in your case the craftsman cordless is more than sufficient.
Like Dave suggested, you need some good sharp bits. Metal drilling is best done at slower speeds. Put the cordless drill on the charger and go to your local hardware store. You want the Cobalt bits. They will say right on the package they are for drilling hard metal.
You'll be amazed at the difference when you put a fresh drill bit on it.
Like Dave suggested, you need some good sharp bits. Metal drilling is best done at slower speeds. Put the cordless drill on the charger and go to your local hardware store. You want the Cobalt bits. They will say right on the package they are for drilling hard metal.
You'll be amazed at the difference when you put a fresh drill bit on it.
"I was removing the axle"
That made me think that the axle was still connected to the vehicle since you had a problem. I figured that you hadn't completed the removal. If it was still attached, then it would not spin because turning the yoke would move the wheels in turn, but there would still be some slop while the drill whirls.
How much is a new yoke? How much is a quote from machine shop to remove and re-tap?
Depending on how your vise is mounted you might be able to throw the whole thing across the table and hold the yoke in a vice.
That made me think that the axle was still connected to the vehicle since you had a problem. I figured that you hadn't completed the removal. If it was still attached, then it would not spin because turning the yoke would move the wheels in turn, but there would still be some slop while the drill whirls.
How much is a new yoke? How much is a quote from machine shop to remove and re-tap?
Depending on how your vise is mounted you might be able to throw the whole thing across the table and hold the yoke in a vice.
The axle was still in the vehicle when it snapped. Then after trying to remove the bolt under the vehicle, I just kept working on getting the axle out. Now it's out.
#13
CF Veteran
Maybe you had another reason, but there is no need to remove the axle to do a disc brake conversion, just throwing that out there.
#14
Member
Thread Starter
Join Date: May 2018
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Will a dremel have anything better than my drill does?