Pacific Northwest Washington, Oregon, Alaska

No fuel/spark

Thread Tools
 
Search this Thread
 
Old 08-12-2013 | 05:04 AM
  #1  
Compstall's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2012
Posts: 33
Likes: 0
From: N. Tacoma
Year: 1997
Model: Cherokee
Engine: 2.5
Default No fuel/spark

Looking for a little assistance here. I have a '97 XJ, vanilla - 5 spd, 2.5, 2wd w/ 170k on it. This little jeep was supposed to run forever....

A few weeks ago it wouldn't start. Had all the symptoms of a bad fuel pump. Fuse checked good, swapped relay w/ starter, all good. Pump wouldn't run. Ordered/installed a new pump.

Initially on the first two cranks the pump didn't prime - I didn't think anything of it after the third try it primed and jeep ran fine, for about a week.

Then it came back again. No pump priming. Turn key to 'on', all lights come on dash as advertised, then go away almost immediately as if the thing is running. Oil and battery lights go off. Hooked my scanner to it, and scanner says vehicle is not connected. Went and checked for spark and nothing. Swapped coils from my '96 ZJ and still no spark.

I'm suspecting the PCM may be bad, and would like to try it with a known good one. Anyone got one? I believe the Wrangler 2.5 PCM would work as well.....or, if you've got one to sell or know somebody locally that would be great!

TIA
Old 08-18-2013 | 09:10 AM
  #2  
mudderx's Avatar
CF Veteran
 
Joined: Sep 2010
Posts: 1,562
Likes: 2
From: Spanaway
Year: 97
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by Compstall
Looking for a little assistance here. I have a '97 XJ, vanilla - 5 spd, 2.5, 2wd w/ 170k on it. This little jeep was supposed to run forever....

A few weeks ago it wouldn't start. Had all the symptoms of a bad fuel pump. Fuse checked good, swapped relay w/ starter, all good. Pump wouldn't run. Ordered/installed a new pump.

Initially on the first two cranks the pump didn't prime - I didn't think anything of it after the third try it primed and jeep ran fine, for about a week.

Then it came back again. No pump priming. Turn key to 'on', all lights come on dash as advertised, then go away almost immediately as if the thing is running. Oil and battery lights go off. Hooked my scanner to it, and scanner says vehicle is not connected. Went and checked for spark and nothing. Swapped coils from my '96 ZJ and still no spark.

I'm suspecting the PCM may be bad, and would like to try it with a known good one. Anyone got one? I believe the Wrangler 2.5 PCM would work as well.....or, if you've got one to sell or know somebody locally that would be great!

TIA
Id check the CPS before replacing the PCM. I had the exact same symptoms with my 98. No spark, no fuel. Swapped coil, ecu, and pcm from my other 98 and still wouldnt run. New CPS and problem solved.

This may help.
http://www.jeepforum.com/forum/f11/9...ew-cps-924600/
Old 09-18-2013 | 02:31 AM
  #3  
Compstall's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2012
Posts: 33
Likes: 0
From: N. Tacoma
Year: 1997
Model: Cherokee
Engine: 2.5
Default

CPS fixed it. $20 on Ebay
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KnightSRT
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
07-19-2013 08:15 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:58 AM.