project full width
07-02-2012 | 08:30 PM
#692
Senior Member
Joined: Nov 2009
Posts: 742
Likes: 0
From: Lake Tapps
Year: 1991
Model: Cherokee
Engine: 4.0L
09-04-2012 | 02:26 PM
#697
Thread Starter
CF Veteran
Joined: Jul 2008
Posts: 1,371
Likes: 2
From: Bonney Lake, WA
Quick update. Will post pics later
Installed brand new FOA 12" coilovers up front to replace the 14s
Installed a pair of 12" 2.0 fox nitrogen shocks in the read to replace the tj springs.
Installing a Rad Designs Rail Shifter 2
Designing a way to mount a 2000# front suck down winch
Installed brand new FOA 12" coilovers up front to replace the 14s
Installed a pair of 12" 2.0 fox nitrogen shocks in the read to replace the tj springs.
Installing a Rad Designs Rail Shifter 2
Designing a way to mount a 2000# front suck down winch
09-09-2012 | 08:25 PM
#701
Thread Starter
CF Veteran
Joined: Jul 2008
Posts: 1,371
Likes: 2
From: Bonney Lake, WA
Went out to Naches on a break in run. The new coilovers and nitrogen shocks rode like a cloud and i was extremely pleased with the results. The new Rad designs rail shifter also worked wonders on my aw4 transmission. Holding 1st and 2nd gear was awesome!
I played around on the funny rocks and moon rocks with all the other buggies in our group. I dont have any pictures of that session but i am searching around to see if anyone else got any.
Here is the top of the moon rocks
Played around on the RTI ramp in camp. I limited the flex quite a bit but still scored a 630
I played around on the funny rocks and moon rocks with all the other buggies in our group. I dont have any pictures of that session but i am searching around to see if anyone else got any.
Here is the top of the moon rocks
Played around on the RTI ramp in camp. I limited the flex quite a bit but still scored a 630
09-20-2012 | 02:53 AM
#703
CF Veteran
Joined: Sep 2008
Posts: 1,053
Likes: 0
From: Ft. Lewis, Wa
Year: 1987
Model: Cherokee
Engine: 4.0
If you do decide on the rockwells tires will definently be cheaper. Are you just gonna wheel it till your unibody is shot and then put all the parts on a buggy.
09-21-2012 | 10:54 AM
#704
Thread Starter
CF Veteran
Joined: Jul 2008
Posts: 1,371
Likes: 2
From: Bonney Lake, WA
Ha i wont be putting rockwells under this thing. Im just getting it just the way i wanted it. Still have some fine tuning and small mods i want to do but i plan on keeping the axle and tire setup like it is for the remainder of its life.
Then build a KOH buggy...
Then build a KOH buggy...
