project full width
#706
CF Veteran
Joined: Nov 2008
Posts: 6,989
Likes: 4
From: Oak Harbor, WA.
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
What's with the new motor, kid? Are you starting the stroker build or did you blow your motor up this last weekend?
#710
I do have a few mods that will hopefully be hapening this winter. I plan to be pulling the rear dana 60 out and replacing the spindles with larger bore spindles to accomodate 35 spline axle shafts. Along with this i must replace my detroit locker side gears and buy some chromoly shafts. This setup should hold up to 42" tires and 400hp with a good flogging
I want to slowly build up a few parts because in a few years i hope to start a super secret project
I want to slowly build up a few parts because in a few years i hope to start a super secret project
#713
well........the end has come......
i found a deal i couldnt pass up on a new project so the CHEROCON will be no more. thanks everyone for the support and comments! i will post up soon on a part out if anyone is interested. the only thing i will be keeping is the motor, transmission and tcase.
i found a deal i couldnt pass up on a new project so the CHEROCON will be no more. thanks everyone for the support and comments! i will post up soon on a part out if anyone is interested. the only thing i will be keeping is the motor, transmission and tcase.
#717
CF Veteran
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0
I'm joining you in the wrangler build. Lol I'm getting a tj hopefully fri.
#719
CF Veteran
Joined: Mar 2011
Posts: 1,842
Likes: 0
From: Woodinville, Bothell and Marysville Washington
Year: 2000
Model: Cherokee
Engine: I6 4.0
#720