Arizona
#1786
Member
Join Date: Apr 2011
Location: Chandler
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0HO
finally got my steering-pull issue ironed out. it's truly amazing what half inch on a track bar can do.....
In all seriousness the front axle was shifted over probably a good inch to the driver's side causing it to pull left pretty hard.. I searched a bunch of threads on "steering pull" and such. The common answers were:
bad alignment(i guess this kinda applies)
sticky/seizing brakes
collapsed brake lines
air in brake lines
improper MC/proportioning valve install or bleed
tire pressure
bad tires
bent axle
bad ball joints or bushings
uneven adjustable arm lengths
incorrect steering geometry
bad TREs
****ty steering in general
thrust steer from misaligned rear axle
and finally offset front axle.
Needless to say, it's my fault for checking one of the easiest things last. I had "eye ball" centered the axle before but the truth came out when i started measuring things.
moral of the story is make sure your front axle is centered
In all seriousness the front axle was shifted over probably a good inch to the driver's side causing it to pull left pretty hard.. I searched a bunch of threads on "steering pull" and such. The common answers were:
bad alignment(i guess this kinda applies)
sticky/seizing brakes
collapsed brake lines
air in brake lines
improper MC/proportioning valve install or bleed
tire pressure
bad tires
bent axle
bad ball joints or bushings
uneven adjustable arm lengths
incorrect steering geometry
bad TREs
****ty steering in general
thrust steer from misaligned rear axle
and finally offset front axle.
Needless to say, it's my fault for checking one of the easiest things last. I had "eye ball" centered the axle before but the truth came out when i started measuring things.
moral of the story is make sure your front axle is centered
#1787
Newbie
Join Date: Apr 2012
Location: Mesa az
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
i got a white xj 4.5 on 31s. in east mesa signal butte and elliot. only right hand drive i know of in az. im down for an xj run when ever
#1788
Member
Join Date: Apr 2010
Location: Queen Creek , Az
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0l
#1789
Member
Join Date: Dec 2011
Location: Phoenix
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
#1790
Seasoned Member
Join Date: Nov 2011
Location: Arizona
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0l
#1791
Member
Join Date: Apr 2011
Location: Chandler
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0HO
FYI there is a WJ sitting in the premeir lot at the picknpull chandler. It's waiting to have the knuckles stripped for your XJ!
Last edited by needxj; 05-12-2012 at 10:38 PM.
#1792
Junior Member
Join Date: Mar 2011
Location: glendale az
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
#1793
Junior Member
Join Date: Feb 2012
Location: Mesa
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
#1795
Newbie
Join Date: Oct 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 Liter
Originally Posted by MCC.XJ4x4
Speaking of junk yards, does anyone know of a 4x4 only yard?
#1796
Seasoned Member
Join Date: Nov 2011
Location: Arizona
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0l
#1797
Junior Member
Join Date: Feb 2012
Location: Mesa
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
#1800
Originally Posted by Corymister
how much is it to do a bastard pack lift?