New Mexico Roll Call.
05-09-2011, 11:12 PM
#1756
Senior Member
Join Date: May 2010
Location: los lunas/ABQ
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0 HO
That is because it is a click thread...the few of you on hear won't interact with new members....just my opinion...I posted a time or two with no interest...and seen other new peeps do the same....I don't take it as a slight,but still a click thread a small < hand full of you and that is it..sad but I guess it is your thread...I am out....
05-10-2011, 12:47 AM
#1757
CF Veteran
Join Date: Jan 2010
Location: Albuquerque
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
someones a little sensative sally jkjk
well if your still up for our crowd your welcome to join in and since i musta over passed your other posts welcome to the forum!
we aint ignorin you new members or anythin like that just musta got carried away in our goofball conversations
anyways got my drivers side hinge mod complete tonight takes me all of about 2 minutes to take the door off and put it back on
passanger side will be tomorrow after work then wednesday my adventure continues to the JY to take some hinges to make for my half doors and ill be complete
well if your still up for our crowd your welcome to join in and since i musta over passed your other posts welcome to the forum!
we aint ignorin you new members or anythin like that just musta got carried away in our goofball conversations
anyways got my drivers side hinge mod complete tonight takes me all of about 2 minutes to take the door off and put it back on
passanger side will be tomorrow after work then wednesday my adventure continues to the JY to take some hinges to make for my half doors and ill be complete
05-10-2011, 01:34 AM
#1759
Member
Join Date: Jan 2011
Location: New Mexico
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Originally Posted by alfreado121
someones a little sensative sally jkjk
well if your still up for our crowd your welcome to join in and since i musta over passed your other posts welcome to the forum!
we aint ignorin you new members or anythin like that just musta got carried away in our goofball conversations
anyways got my drivers side hinge mod complete tonight takes me all of about 2 minutes to take the door off and put it back on
passanger side will be tomorrow after work then wednesday my adventure continues to the JY to take some hinges to make for my half doors and ill be complete
well if your still up for our crowd your welcome to join in and since i musta over passed your other posts welcome to the forum!
we aint ignorin you new members or anythin like that just musta got carried away in our goofball conversations
anyways got my drivers side hinge mod complete tonight takes me all of about 2 minutes to take the door off and put it back on
passanger side will be tomorrow after work then wednesday my adventure continues to the JY to take some hinges to make for my half doors and ill be complete
05-10-2011, 09:13 AM
#1760
CF Veteran
Join Date: Jan 2010
Location: Albuquerque
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
share my design??
my half doors? ya ill get pictures up soon, basically i followed the window line from the rear of the door straight down thru the door handle and down to the center of the door then from the side view mirror i cut at a 45 degree down towards the middle of the door and joined it across the middle of the door
anyone know what the door handles are actually made of? because for my driver door i used a cutting wheel and it was fine and for my passanger side i deided the torch would be so much faster and ended up melting the handle like it was styyrofoam or something
also if i go to U Pull It with my angle grinder do they have electricty that i can use like extention cords or do i have to bring my own?
my half doors? ya ill get pictures up soon, basically i followed the window line from the rear of the door straight down thru the door handle and down to the center of the door then from the side view mirror i cut at a 45 degree down towards the middle of the door and joined it across the middle of the door
anyone know what the door handles are actually made of? because for my driver door i used a cutting wheel and it was fine and for my passanger side i deided the torch would be so much faster and ended up melting the handle like it was styyrofoam or something
also if i go to U Pull It with my angle grinder do they have electricty that i can use like extention cords or do i have to bring my own?
05-10-2011, 09:57 AM
#1761
CF Veteran
Join Date: Jul 2010
Location: Albuquerque
Posts: 1,208
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
That is because it is a click thread...the few of you on hear won't interact with new members....just my opinion...I posted a time or two with no interest...and seen other new peeps do the same....I don't take it as a slight,but still a click thread a small < hand full of you and that is it..sad but I guess it is your thread...I am out....
share my design??
my half doors? ya ill get pictures up soon, basically i followed the window line from the rear of the door straight down thru the door handle and down to the center of the door then from the side view mirror i cut at a 45 degree down towards the middle of the door and joined it across the middle of the door
anyone know what the door handles are actually made of? because for my driver door i used a cutting wheel and it was fine and for my passanger side i deided the torch would be so much faster and ended up melting the handle like it was styyrofoam or something
also if i go to U Pull It with my angle grinder do they have electricty that i can use like extention cords or do i have to bring my own?
my half doors? ya ill get pictures up soon, basically i followed the window line from the rear of the door straight down thru the door handle and down to the center of the door then from the side view mirror i cut at a 45 degree down towards the middle of the door and joined it across the middle of the door
anyone know what the door handles are actually made of? because for my driver door i used a cutting wheel and it was fine and for my passanger side i deided the torch would be so much faster and ended up melting the handle like it was styyrofoam or something
also if i go to U Pull It with my angle grinder do they have electricty that i can use like extention cords or do i have to bring my own?
05-10-2011, 09:58 AM
#1762
Honorary Moderator
Join Date: Mar 2010
Location: Gilbert AZ/Las Cruces NM
Posts: 8,135
Likes: 0
Received 14 Likes
on
12 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
any national "u-pull it" or the like is hand tools only...
and this is definitely and open invitation thread! glad to have ya hear!
and this is definitely and open invitation thread! glad to have ya hear!
05-10-2011, 07:27 PM
#1767
CF Veteran
Join Date: Jan 2010
Location: Albuquerque
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
guess i need ideas on how to get some door hinges off??
i was planning on using my grinder to just cut then from the body but i dont have a battery powered grinder or a generator??
looks like there should be something on the transfercase? like where that jack is maybe?? im not sure
i was planning on using my grinder to just cut then from the body but i dont have a battery powered grinder or a generator??
looks like there should be something on the transfercase? like where that jack is maybe?? im not sure
05-10-2011, 07:39 PM
#1768
Honorary Moderator
Join Date: Mar 2010
Location: Gilbert AZ/Las Cruces NM
Posts: 8,135
Likes: 0
Received 14 Likes
on
12 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
guess i need ideas on how to get some door hinges off??
i was planning on using my grinder to just cut then from the body but i dont have a battery powered grinder or a generator??
looks like there should be something on the transfercase? like where that jack is maybe?? im not sure
i was planning on using my grinder to just cut then from the body but i dont have a battery powered grinder or a generator??
looks like there should be something on the transfercase? like where that jack is maybe?? im not sure
and no cross member, no cross member bolts/studs, no lower control arm mounts and no control arms
it is all done ut drilling it
