PurpleToxin505

Oh nice, I want to paint mine bright green, along with DS's, tie rod, TB, and diff covers. But I want to paint my axels black. Any tips on paining without removing anything, besides lots of masking

PurpleToxin505

I attempted it with lense tint but after like 8 coats the light was still coming through

T-Rexj

the light is supposed to come through atleast where i live id get pulled over if it isnt even jsut a corner of my light theyre sticklers here about everything, got pulled over one time cause my lights were to bright strange cuase they were they factory lights, guess it was quotta time or something.... not to mention my lights are pretty much useless already if i did that id never see anything

PurpleToxin505

Well it says dont use more than 3 so light will come through. I used a whole can like 7 or 8 coats. I used 2 on my jeep lights haven't had a problem yet. But in my jetta I did 3 and they gave me a fix it ticket, all I did was take in an older picture of my car before the tint and they dropped it

curts97

For stuff like that I would clean clean clean, then degrease, then lightly sand or wirewheel it, then clean and degrease again, primer, paint, and clear coat (doesnt have to be high gloss). Thats what I did with my wheels and they turned out great with little to no chipping.

curts97

Also do light coats, less chance for chips. An since it is on the jeep while you paint it I would get some boxes cut them so they open out and use those to block what you dont want over spray on.

T-Rexj

i wanna paint all that aswell just not sure what color dont wanna stick out to much, maybe a blue

G000se

Just about finished my bumpers today. Just need my d-rings to arrive in the mail.

PurpleToxin505

Those look good, did you make yourself

G000se

Edit Duplicate

G000se

A friend of mine did most of the work. Can't wait to get some lights mounted and get my recovery points on.

curts97

They do look pretty good!

T-Rexj

looks great wantin something similar

Monster3663

Nice looking XJ!

NFJ79

Seafoamed my jeep today. After I noticed a slight ticking sound coming from the head that I have never really heard before.
I did notice I have a exhaust leak coming from the donut ring gasket to the downpipe. I tried tightening flange thingy, but its still leaking. I'm hoping this is were the ticking is coming from.