So the rough country kit is 649 bucks can I build it cheaper
How do I do the cross member build it or buy it

 

Clayton's looks real easy to build

 

 

I would like in on this plan also.

 

I built pretty much this same kit for my jeep. I was about $250 for everything and I did all the work my self. but of course I used my rubicon uppers and had all the metal for the cross member in the scrap pile so it saved me a bit of money.

 

Yeah I seen it on another form that you put up. I was going to build mine my slef but don't trust a HF welder for that chore :-)

 

looking for "cheap" is the wrong outlook when going long arms IMO. I hate the joints on my kit. so add 200$ to the RC kit if you want it to be an ok setup. Or you can put it off until I build mine and I'll sell you my RC long arms/crossmember with new rc joints for 250$ complete lol

yeah its pretty simple really, However I would stay with there 3 link kit over the radius setup.

That would work, I could swing by and grab them tomorrow, if that works for you. pm me the adress and time your going to be there.

 

I'm into my 3 link about 350 with joints, bungs, and steel. What tristin said, if your gonna build it then build it right. Don't skimp on joints or arm material. I wouldn't do anything other then a true 3-link. Id give ya the dimensions and geometry of mine but I pushed my front end forward about 4-5" which I'm assuming you aren't planning on doing.

 

yeah, nothing more annoying then oing somthing twice because you wanted to save 20-50$ now lol!

My front is forward about 2.5-3" and want it to be about 4-5" interested to see how yours sits to see how it would be.

 

Well give it one more week and you will see pics/video of how it looks and performs.

 

x2 I want a sneak peak

 

Got my heims :-)


Anybody have a drop pitman arm the want to sell lifted my cousins jeep and now it has DW so bad

 

How much endplay is allowed on an ax15 input shaft?

 

Hatfields & mccoys on history was a good show

 

So do I need to do a 4 link axle truss then if I do that