Northern Utah BS thread
#2149
Seasoned Member
Join Date: Aug 2010
Location: salt lake city, utah
Posts: 462
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
awesome ryan i might take you up on that offer haha so get this i went and got some high temp engine paint for my valve cover and the gasket and well i got home and went to take the vc off and not one bolt was tight, i had three missing on the manifold side and some were half way out!
#2153
CF Veteran
Join Date: Aug 2009
Location: Herriman, Utah
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
My VC was the same way the first time I changed it. Un did every bolt with my fingers. The gaskets get hard and shrink, then the valve cover is left floating on top with loose bolts. Nice find!
Just got done fixing Mike's brackets on his long arm (if you want to call it that) setup. Kiddin man.
Just got done fixing Mike's brackets on his long arm (if you want to call it that) setup. Kiddin man.
#2156
Seasoned Member
Join Date: Aug 2010
Location: salt lake city, utah
Posts: 462
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
ryan lol i got home and went to take the vc off and not one bolt was tight, i had three missing on the manifold side and some were half way out!