Northern Utah BS thread
#2537
Member
Join Date: Sep 2010
Location: Murray/ Salt lake
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Year: 90
Model: Cherokee
Engine: 4.0
Yep I'm pretty sure i'm gonna need a second job just to pay for the jeep lol. Then maybe there will be cooler pics of mine. I love that in the pic of us at forest lake mine is the only one with the hood up.
#2542
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
#2544
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
I had no other problems with them after we stopped at 7200, hard to say if switching the relay actually fixed them though, I guess time will tell. Thanks again for your help on it.
#2546
CF Veteran
Join Date: Sep 2010
Location: Springville, UT
Posts: 1,649
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Grand Cherokee
Engine: 5.2 V8, Dual cold air, dual batts, E-fan, Sanden OBA
That was bad *** we gotta start plannin our next trip! i would post pics but i'm new on here so its confusing and slow so if you wanna check some out go to my profile and look...
Thanks for the help and enthusiasm when my jeep decided to tear itself apart in a bad spot i appreciate it you guys are all awesome!
decided im gonna change how the shocks are mounted to maximize my flex then get limiting straps to keep it under control-grade 8 bolts all being switched in Mon. or Tue.
So hopefully next time i can go a day without problems! oh and im puttin my spare radiator in tomorrow and flushing coolant system to ensure all the build up is gone
But overall hella good run
Thanks for the help and enthusiasm when my jeep decided to tear itself apart in a bad spot i appreciate it you guys are all awesome!
decided im gonna change how the shocks are mounted to maximize my flex then get limiting straps to keep it under control-grade 8 bolts all being switched in Mon. or Tue.
So hopefully next time i can go a day without problems! oh and im puttin my spare radiator in tomorrow and flushing coolant system to ensure all the build up is gone
But overall hella good run
#2547
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Hell ya Zach welcome to CF man! If I was you I'd weld that section that broke & keep the 2 grade 8's in there for good measure! As for the help & parts, I know you'd be there for any of us!!!
#2549
CF Veteran
Join Date: Aug 2010
Location: Huricane, Utah
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994 Ford Bronco
Model: Cherokee
Engine: 351 W
I wish I could look at the pic's! But my phone will not load that much information lol, anywho welcome to cherokeeforum Zach and I agree with ryan weld that wishbone on the axle and leave the grade 8 bolt's for good measure I dropped my trans off at the shop 2 get it fixed and tonight the sawzall's coming out to cut some more fender to clear 35's that is next on my list! i have 2" shackles for the rear,looks like i need to get some springs for the front to get me up 2 more inches...
#2550
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
What r they gonna charge you to fix the trans Tom? That place I went threw is EVERDRIVE 888-869-1919! I had to replace the front pump seal, front output seal, filter(s), & pan seal or the 3 year warranty was void!
All those parts were $5-$15 a piece...
All those parts were $5-$15 a piece...