Northern Utah BS thread
#3571
make sure you have fluid in there and if it still doesn't work make sure there isn't a leak. if it is all intact and still doesn't work you can bleed the system, it kinda sucks though. hydraulic clutches are not neat for that reason. cables are easy to adjust and whatnot
#3572
Seasoned Member
Join Date: Sep 2010
Location: West Utardiland
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Hope the throwout bearing didn't get cocked. When I put my Samurai back together it moved just a hair and the fingers got misplaced. I couldn't move it at all.
#3573
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
I login then go to tech forum and it shows me not loggedin...
Wanting to post some questions and can't...
So jumped to this thread to see if any help available from you guys.
Have a mostly stock (skids, brushbar and orage top injectors added) POS 1990 XJ and really could use some help.
It has several electrical issues and the Flintstone's floor mod.
Mechanically it is good though.
Please email me as not sure forum is working correctly for me.
I'm located downtown SLC btw.
TIA for replies,
Troy
tagordon_slc@hotmail.com
Wanting to post some questions and can't...
So jumped to this thread to see if any help available from you guys.
Have a mostly stock (skids, brushbar and orage top injectors added) POS 1990 XJ and really could use some help.
It has several electrical issues and the Flintstone's floor mod.
Mechanically it is good though.
Please email me as not sure forum is working correctly for me.
I'm located downtown SLC btw.
TIA for replies,
Troy
tagordon_slc@hotmail.com
Last edited by Desert Rat; 11-08-2010 at 06:22 PM.
#3574
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
#3576
#3579
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
And the run was awesome! Thanks for getting a couple pics of my rig Mike.
Last edited by Desert Rat; 11-08-2010 at 07:05 PM. Reason: Forgot to thank Mike
#3581
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
#3583
Senior Member
Join Date: Jan 2010
Location: Taylorsville, UT
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Almost there
OK, it's a montage. I cut as much of the fat out of them as I could, and it came down to two uploads. The first has everything up to Mike getting up the wedgie, and the second has Chandler on the wedgie and a couple shots of that last patch.
It should be available to view in about 20 minutes. I will post the link when it is ready, or you can search "floydargue" or "ATR offroad"
In the meantime, check out our old family beast going through the Golden Crack. Listen to that sheet metal scraping the ground, and tell me it isn't awesome
It should be available to view in about 20 minutes. I will post the link when it is ready, or you can search "floydargue" or "ATR offroad"
In the meantime, check out our old family beast going through the Golden Crack. Listen to that sheet metal scraping the ground, and tell me it isn't awesome
#3584
Junior Member
Join Date: Sep 2010
Location: Springville
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2 318
So yesterday my oil pressure was where it normaly is and today I leave work and it was alot lower than usual checked the oil and it was fine haha time to punch the jeep in the kisser