Northern Utah BS thread
06-02-2011, 11:45 AM
#6916
CF Veteran
Join Date: Jan 2009
Location: Utardiland
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
sorry but no, its all the same axle, same gears, same carrier, same control arms, same bushings. there is no difference at all. sorry there is one difference, all TJ's ZJ's and WJ's are all low pinion, the XJ, MJ, had high pinions in the early yrs with smaller u-joints
Last edited by jmaxj; 06-02-2011 at 11:48 AM.
06-02-2011, 12:05 PM
#6918
CF Veteran
Join Date: Jan 2009
Location: Utardiland
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
well i guess since evo only really only deals with tj and jk's i assume thats why they only said those two. and i am assuming these are the sleeves that slide inside of the housing in between the seals to keep dirt and crap completely out of the tubes right?
if so, they will not work with a disconnect axle. just a little more info for ya
if so, they will not work with a disconnect axle. just a little more info for ya
06-02-2011, 02:11 PM
#6921
Senior Member
Join Date: Oct 2009
Location: Hyrum,UT
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 1-6 4.0
06-02-2011, 02:25 PM
#6922
CF Veteran
Join Date: Aug 2009
Location: Herriman, Utah
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
06-02-2011, 02:47 PM
#6924
CF Veteran
Join Date: Jan 2009
Location: Utardiland
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
06-02-2011, 02:57 PM
#6925
CF Veteran
Join Date: Aug 2009
Location: Herriman, Utah
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
06-02-2011, 03:00 PM
#6926
CF Veteran
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 4,968
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
the XJ are HP threw 99, then 2000-2001 are LP right?
the 2000-2001 front axle is the same as a TJ as in LP,calipers,rotors wont fit earlyer xj's?
not that this matters to me just curiouse as I have miss information too? just want to be able to be correct...
06-02-2011, 03:03 PM
#6927
CF Veteran
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 4,968
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
sweet! i hope i never "need" them when i step it up...
and I did all that work. i guess i just never found my manual hub locks, i need to open my eyes...
and I did all that work. i guess i just never found my manual hub locks, i need to open my eyes...
06-02-2011, 03:27 PM
#6928
CF Veteran
Join Date: Jan 2009
Location: Utardiland
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
really? interesting. from what I have READ his statment is "true"...
the XJ are HP threw 99, then 2000-2001 are LP right?
the 2000-2001 front axle is the same as a TJ as in LP,calipers,rotors wont fit earlyer xj's?
not that this matters to me just curiouse as I have miss information too? just want to be able to be correct...
the XJ are HP threw 99, then 2000-2001 are LP right?
the 2000-2001 front axle is the same as a TJ as in LP,calipers,rotors wont fit earlyer xj's?
not that this matters to me just curiouse as I have miss information too? just want to be able to be correct...
XJ's HP 84-99 the majority (there were a few rare ones in 85-88 that had the LP) plus can't forget the disconnect that was put in a lot until 91 lol
XJ's 99 1/2-01 got a LP axle due to the redesign of the exhaust manifold and downpipe.
TJ's 97-06 (except rubicon)were LP
TJ and TJ unlimited rubicon ALL had a 30/44 hybrid HP axle
ZJ's 93-95 without v-8 HP
ZJ's 95-98 LP 30 in all
WJ's 99-04 HP 30 in all
now all this CAN be interchanged BUT, lets say you want to put a HP 30 in you 2000 XJ but don't wanna buy new brakes and such for the LP you just bent. well it's simple, the only thing different was the knuckle out. if you swap knuckles, calipers rotors, uni bearings brake pads everything will work fine.
i had a HP30 out of a 93XJ at one point that everything from the inner C out was all for an 88. i also had a housing out of a 87 or 88 can't remember that everything from the knuckle out was all 96 stuff. (thats the one i gave tom)
hope that kinda cleared things up a bit
if you wanna get technical cory, some models of XJ's in europe came with a 44 front, but good luck finding them in the US
Last edited by jmaxj; 06-02-2011 at 03:43 PM.
06-02-2011, 03:29 PM
#6929
CF Veteran
Join Date: Jan 2009
Location: Utardiland
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
if your gonna run anything bigger than 33's i would, 35's are ok but its pushing it. anyting bigger than 35's is guaranteed breakage lol
