Northern Utah BS thread
#916
Senior Member
Join Date: Mar 2010
Location: Logan, UT
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L i6
I just got a new battery for the jeep for 5 bucks.... Brought the old one to Napa because there was a napa sign on top of it, and pretended I didn;t know when it was bought... they replaced it with no question asked....
I am getting there guys, electrical gremmlins will not win... Looks like bad battery was the reason for the drain, but I have / and still checking all circuits one by one for shorts...
I can't wait to get to the mechanical part and actually learn something more interesting lol....
This week end I will try to tour some junkyards... any body know of one that is not too bad around ? I have heard that the one in Willard is good.
I am getting there guys, electrical gremmlins will not win... Looks like bad battery was the reason for the drain, but I have / and still checking all circuits one by one for shorts...
I can't wait to get to the mechanical part and actually learn something more interesting lol....
This week end I will try to tour some junkyards... any body know of one that is not too bad around ? I have heard that the one in Willard is good.
#918
Senior Member
Join Date: Mar 2010
Location: Logan, UT
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L i6
that is a little bit too far I think.... maybe one of these week end when i know more of what i want lol (and after I learn exactly how to take them out too) then I guess this one is by you so i will definitwely invite me for coffee (oh wait it is Utah no coffee... then a beer ?)
#919
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
I dont think any of us on this BS thread are mormon (or at lease not by the book mormons) I for 1 couldn't get my ***** outta bed with out a STRONG cup of coffee!!! So ya I'm always down to go diggin in the C4C grave yards...
Last edited by builtnotbought89'; 03-23-2010 at 12:48 PM.
#921
Newbie
Join Date: Mar 2010
Location: West Jordan Utah
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Just got back from Moab! Great trip, we only ran a couple trails. We ran part of gold bar rim, gemini, and metal masher and fins n things on friday. Saturday we ran steel bender. where i broke a u joint and a sway bar link. Then i blew a tire, the sidewall split from being old rubber, on my parents 05 unlimited, (dont buy tires in moab.. expensive 2 33s for 500) lol
And all this was done in my xj with 3" lift and 235s lol. gotta love when people say you cant do a trail with small tires and small lift.
was only winched up one spot on steel bender.
Full flex
few more pics here
http://s279.photobucket.com/albums/k...0March%202010/
Ill get more up when i get a chance!
And all this was done in my xj with 3" lift and 235s lol. gotta love when people say you cant do a trail with small tires and small lift.
was only winched up one spot on steel bender.
Full flex
few more pics here
http://s279.photobucket.com/albums/k...0March%202010/
Ill get more up when i get a chance!
#922
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Thats awesome, great pic, a 3" lift on an XJ actually makes 'em quite capable of a lot of stuff one would'nt think possible.
#924
Newbie
Join Date: Mar 2010
Location: West Jordan Utah
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Just got twisted about like that picture. and the top of the link broke off. where it connects to the sway bar.
after that we dropped the sway bar until i could get parts the next day for the drive home. that picture is with the sway bar off
after that we dropped the sway bar until i could get parts the next day for the drive home. that picture is with the sway bar off
#926
Senior Member
Join Date: Oct 2009
Location: Hyrum,UT
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 1-6 4.0
well it has been a long couple of night but i am about done with my long arm build just have to cut the old brackets off and I'm done. check out my build on xjtalk.com or i will post some pics here. now let's wheel.
#927
Seasoned Member
Join Date: Dec 2008
Location: 25 Miles From Moab!
Posts: 348
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Shhhhhhhhhhhhh! You guys hear that? i think I hear crickets in this thread its so quiet!
that is because everybody is working on their jeeps to have them ready for the early srping ?
When are we going to see some pics of your rig with the long arm upgrade Cliff?
that is because everybody is working on their jeeps to have them ready for the early srping ?
When are we going to see some pics of your rig with the long arm upgrade Cliff?
Christened
Test Pics...
Seven Mile Rim
#928
Seasoned Member
Join Date: Dec 2008
Location: 25 Miles From Moab!
Posts: 348
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
And an infamous Moab obstacle I was bumming around on... can anyone guess where it is?
I actually made it pretty easy since it was really sandy and I am running almost bald tires at the moment. Sorry I don't have any pics of the seat install yet.
#929
Seasoned Member
Join Date: Dec 2008
Location: 25 Miles From Moab!
Posts: 348
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
that thing was a POS, so I called harbor freight (redwood) & told them I got it for my b-day... long story short I got a brand new 90 amp flux wire feed for $75 with a 2 year warranty!!!
well it has been a long couple of night but i am about done with my long arm build just have to cut the old brackets off and I'm done. check out my build on xjtalk.com or i will post some pics here.
Now lets wheel!
Last edited by Cliff; 03-23-2010 at 11:40 PM.