Northern Utah BS thread
#1066
Senior Member
Join Date: Mar 2010
Location: Logan, UT
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L i6
Nope never bled brakes before.... but I have read all the tutorials I could find so far. Well the Ebrake is not working even though the cable seem to be tight and after I removed the drum, I had my son press the brake pedal and all i would see was a small movement on only one part of the shoe... like I said I got it to learn so i don;t mind taking it apart.
As for the drums at checker, i will check that but they said they charged about $25 to turn them and I see some new online for less than that so I was wondering if it was worth it.
Anyway thanks for all the advices
As for the drums at checker, i will check that but they said they charged about $25 to turn them and I see some new online for less than that so I was wondering if it was worth it.
Anyway thanks for all the advices
#1068
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Got the roof rack completed and mounted this morning. Stout as can be, I can grab the rack and rock the whole Jeep so I think it'll work out pretty good.
#1069
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Nice that thing turned out prety clean jeff!!!
Almost got the tail bone all mounted up yesterday, so after work Im hoping I can finish it! I'll try post some pics soon!
Almost got the tail bone all mounted up yesterday, so after work Im hoping I can finish it! I'll try post some pics soon!
#1070
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Thanks Ryan! Cant wait to see that tailbone installed, you've got me leaning towards going that way with mine. I want to beef her up without completely abandoning the clean stock look.
#1071
Senior Member
Join Date: Oct 2009
Location: Hyrum,UT
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 1-6 4.0
i have got a bumper that i am building right now that will have stock clean look. i am building it to sale so i can make a tire carrier. i would like $175 for it.
#1073
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Idk off the top of my head, but I will snag the paper when I get home & let u know! Or just call mark on the 606 # listed on the detours site! He's way cool & 1 hell of a welder!
#1074
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
So ya I paid;
Tailbone- $280
Backbone- $385
Total shipping- $83 (I figure about $45-$50 to ship the tail bone)
Plus he gave me $25 off for ordering them both at the same time!!!
Grand total of $723 not to bad it you've priced some of the other bumpers!
Tailbone- $280
Backbone- $385
Total shipping- $83 (I figure about $45-$50 to ship the tail bone)
Plus he gave me $25 off for ordering them both at the same time!!!
Grand total of $723 not to bad it you've priced some of the other bumpers!
#1075
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Sweet, thats super reasonable on the shipping. Thanks Bro! I'm thinking I'm going to go with the Tailbone, the more I look at their setup, the more I like it, I just wish it had a built in hitch. I'm thinking this front bumper
http://logansmetals4x4.com/id9.html with the Warn M8000 winch.
http://logansmetals4x4.com/id9.html with the Warn M8000 winch.
#1076
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
That thing look beefy!!! Well knowing the tailbone pretty good... I'd say it wouldn't be hard at all to toss a receiver on the system!
Wasatch steel even sells premade receivers to weld onto it!
Wasatch steel even sells premade receivers to weld onto it!
#1077
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Cool, I'll have to look into that, I want to lose the factory hitch as it hangs too low and looks like crap. Wiring hookups all jacked up anyway since I bounced it off a rock at Lil Moab, ha ha. Good times!
#1079
CF Veteran
Thread Starter
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Sorry to keep buggin you with questions about the tailbone, but...... I was looking on the website and in the pics I dont see anything holding the hinge side of the tire carrier down on the spindle. Am I just not seeing it, is there a nut that holds it down? Again not wanting to be a bother, I just want to make an educated purchase. Thanks man.
#1080
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
No worries dude! Ya there's a bolt on top of the hing that threads into the perch... Its a beefy *** system! If u wanna check it out I'll be putting it all together tomarrow around 6:30-7:00pm ish & could use a hand! Let me know & I'll PM ya my new adress!