Indiana anyone?
#1531
Member
Joined: Apr 2011
Posts: 192
Likes: 0
From: Indianapolis,IN
Year: 1997
Model: Cherokee
Engine: 4.0
Just finished installing 1/2" coil spring spacers to level out the front wearing my trusty fingerless gloves. It had a raked look after I did the low profile shackle relocation. XJ OCD cured.....for tonight.....
#1532
Member
Joined: Apr 2011
Posts: 192
Likes: 0
From: Indianapolis,IN
Year: 1997
Model: Cherokee
Engine: 4.0
#1533
Senior Member
Joined: Jan 2012
Posts: 635
Likes: 2
From: Indiana
Year: 1999
Model: Cherokee
Engine: 4.0
Where did you get the .5 spacers? Only found 3/4 inch online when I was looking. Still want them cause of the raked look!
Merry Xmas indiana jeepers! Hope everyone is safe and in good spirits for the holiday!
Merry Xmas indiana jeepers! Hope everyone is safe and in good spirits for the holiday!
#1541
Got in mine earlier and the heater blower radio etc. wasn't working. The ignition had been messed up since I got it a couple weeks ago. Didn't need a key to start it heck the key wouldn't even fit anymore. So I through the ol' push button start with a kill switch and life is good again....
#1543
#1544
Seasoned Member
Joined: Jan 2014
Posts: 261
Likes: 1
From: Indianapolis, IN
Year: 1993
Model: Cherokee
Engine: 4.0
Checking in from Indianapolis but not going to be wheeling anytime soon. Need to work on the old beat up high mileage beastie. Needs a master cyl, rear axle seal and new pads up front. Need to pull and clean the Neutral Safety Switch so I can reliably start it. Needs some grill parts and a right passenger front fender (might just pound on it). Something to do this Summer.
#1545
Checking in from Indianapolis but not going to be wheeling anytime soon. Need to work on the old beat up high mileage beastie. Needs a master cyl, rear axle seal and new pads up front. Need to pull and clean the Neutral Safety Switch so I can reliably start it. Needs some grill parts and a right passenger front fender (might just pound on it). Something to do this Summer.