ohio roll call
#5341
CF Veteran
Join Date: Apr 2011
Location: Dayton Ohio
Posts: 2,080
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998 classic
Model: Cherokee
Engine: 4.0!!
#5342
Junior Member
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Originally Posted by LongArmXJ
What surface were you using to get your measurements for the toe?
#5343
Junior Member
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Oh....surface, you mean square from floor up? I thought about that. I doubt I'll put more than another 200 moles on er before I get er on a pro's rack. I eyeballed because it was HORRIBLE and anything is better than what it was. It is better than its been in 9 years! Which is the date stamp on the sticker on the replacement brackets used to repair the wreck damage. The fender, driver door and bumper brackets are all new-er. She was wrecked.... now she's comin to life.
Can't imagine how many tires she went through! It has 184,000 miles, ffs!
Can't imagine how many tires she went through! It has 184,000 miles, ffs!
#5347
Junior Member
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Good, now that you are back.....
What's the best masking tape for vehicle? I know regular-Ole masking tape will leave a raised shelf of paint. I'm just covering up old gold lower two-tone under the door molding. Not expected to be 100% permanent but don't want that pesky separation line. Make sense??
Oh, welcome back, btw...
What's the best masking tape for vehicle? I know regular-Ole masking tape will leave a raised shelf of paint. I'm just covering up old gold lower two-tone under the door molding. Not expected to be 100% permanent but don't want that pesky separation line. Make sense??
Oh, welcome back, btw...
#5350
Junior Member
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Originally Posted by Customizer1000
Any and every tape will leave that ledge because of the thickness of the paint being applied, I use the green 3m stuff most of the time, it doesn't leave residue
#5351
CF Veteran
Join Date: Jun 2011
Location: Dayton, Ohio
Posts: 2,460
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Comanche
Engine: 4.0
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Originally Posted by Customizer1000
Any and every tape will leave that ledge because of the thickness of the paint being applied, I use the green 3m stuff most of the time, it doesn't leave residue
#5352
Member
Join Date: Jan 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
I bent my drill bit so I haven't made any progress on the jeep. I think I just might put the stock track bar back on and finish the rear just so I can drive it around. You with Bezerks or what ever its called?
#5355
CF Veteran
Join Date: Jan 2011
Location: Ohio
Posts: 11,176
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Originally Posted by Hammbone
I need to come check it out what days and time are you there. I was just going to exchange at home depot for a new one.