ohio roll call
#9796
Seasoned Member
Join Date: Jun 2009
Location: Mid-Ohio Valley, Ohio
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
I'm hoping to make it but idk with my tranny. Deff thinking its my solenoids. More specifically #2. It'll go into 1st but has trouble going into 2nd. But once it does go it will go from 2nd to 3rd and 3rd back to 2nd OK but not from 2nd to 1st and 1st to 2nd. And going by solenoid charts that's #2. Since both #1 & #2 are the same and I hear u can order 2 packs offline for around $100 I'll prolly do that. I've found a couple other shift solenoid threads that sound like mine.
IT ONLY HAPPENS WARM.
IT ONLY HAPPENS WARM.
Last edited by idahoboarder; 10-13-2013 at 09:27 AM.
#9797
Yes if its just not shifting but its solid. Very well could be the noids. But if there is any slipping, more than likely an internal problem.
If you put noids in it. Check the accumulator that pressurizes the band. It may need cleaned, broken spring, etc... You can access it from the pan. Or on the side. I forget which location that one has.
If you put noids in it. Check the accumulator that pressurizes the band. It may need cleaned, broken spring, etc... You can access it from the pan. Or on the side. I forget which location that one has.
#9798
CF Veteran
Join Date: May 2009
Location: Columbus, Ohio
Posts: 1,471
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0L
Yea see its not so much a slip. When I'm accelerating thru 1st and I'm getting to 2nd its like it shifts early into 2nd. But sometimes won't shift into it at all and will jus high rev. I'll let off the gas and let the rpms drop and settle and accel again hoping it shifted as I slowed off the gas
#9800
Seasoned Member
Join Date: Jun 2009
Location: Mid-Ohio Valley, Ohio
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Thursday I'm off so it's work-on-the-Cherokee day. Need to figure out how to get the cb mounted, antennae relocated, and fire extinguisher mounted up somewhere, as well as do a typical check on my bolts and stuff. Hoping I can go to Heiney. If not I'm gonna be pretty upset.
#9801
CF Veteran
Join Date: Sep 2012
Location: grove city OHIO
Posts: 1,169
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 HO
Thursday I'm off so it's work-on-the-Cherokee day. Need to figure out how to get the cb mounted, antennae relocated, and fire extinguisher mounted up somewhere, as well as do a typical check on my bolts and stuff. Hoping I can go to Heiney. If not I'm gonna be pretty upset.
#9802
Seasoned Member
Join Date: Jun 2009
Location: Mid-Ohio Valley, Ohio
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
#9807
#9808
Seasoned Member
Join Date: Jun 2009
Location: Mid-Ohio Valley, Ohio
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
#9809
Seasoned Member
Join Date: Jun 2009
Location: Mid-Ohio Valley, Ohio
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
As long as I get the day off and work the next evening I'll be there. Gonna get some stuff together this week for and see how much room it leaves in the jeep.
#9810
CF Veteran
Join Date: May 2009
Location: Columbus, Ohio
Posts: 1,471
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0L
After reading around more I'm starting to think I lost 2nd gear. Kinda makes me think solenoid. Where's the best place to get them. Auto zone said 170. Napa don't carry them.