Any Georgians?
02-04-2013, 01:20 PM
#2477
Junior Member
Go to the dang PaP and quit screwin around!
Ya pay 2 bucks to walk the yard. Worst case you loose 2 bucks and 2 hours of your life.
I enjoy walking around in there anyways.
Ya pay 2 bucks to walk the yard. Worst case you loose 2 bucks and 2 hours of your life.
I enjoy walking around in there anyways.
02-04-2013, 01:29 PM
#2478
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
How far is it from you? There isn't a west one so I have to go To the south one. Looks an hour 15 or so from me
02-04-2013, 02:31 PM
#2481
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Third thing today that's been politics... Finally back home now and there is a fire truck next door with three of them talking to someone parked in a mustang in the driveway with the medic bag... Wtf
02-04-2013, 02:46 PM
#2482
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
That's an average Tuesday for me. I live a 1/4 mile from the fire/ emergency rescue place, in a neighborhood full of the elderly.
02-04-2013, 03:02 PM
#2483
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Need to pull the front shaft, disco shocks, disco track bar, undo all 4 control arms, coil retainer clip, and what else?
Should i take a TRE puller and beat them off of the thing then im done?
02-04-2013, 03:05 PM
#2485
Junior Member
They left like 10 min ago so i guess all was good... Gonna go to PAP on Friday after i get off at 2 and dick around until they close at 6. Gonna grab driveshafts and front axle... Well try at least.
Need to pull the front shaft, disco shocks, disco track bar, undo all 4 control arms, coil retainer clip, and what else?
Should i take a TRE puller and beat them off of the thing then im done?
Need to pull the front shaft, disco shocks, disco track bar, undo all 4 control arms, coil retainer clip, and what else?
Should i take a TRE puller and beat them off of the thing then im done?
Big *** hammer is fine.
I usually take a huge hammer and pickle fork.
That's all. All of which should be easy.
Verify gear ratio, high pinon, non-disconnect.
Your Jeep has 3.55s?
02-04-2013, 03:08 PM
#2488
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Non disco of course and yes 3:55's. Cut the brake lines with what?
Sounds super easy in theory till i get there and i have no jack haha
