Any Georgians?
07-14-2013, 07:35 PM
#4157
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
I'll get junking up Colton's thread.
What brand rock sliders?
For the front, trace the flair, take it off and cut on the line. Then bumpstop and be good.
Rear, make a bunch if relief cuts in the fender in between the spot welds, hammer flat and massage it down flat behind the lip then paint where it flaked off.
Also need to trim the inner fender lip inside the front fenders.
What brand rock sliders?
For the front, trace the flair, take it off and cut on the line. Then bumpstop and be good.
Rear, make a bunch if relief cuts in the fender in between the spot welds, hammer flat and massage it down flat behind the lip then paint where it flaked off.
Also need to trim the inner fender lip inside the front fenders.
07-14-2013, 07:46 PM
#4158
Senior Member
Join Date: Oct 2011
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Oh sorry, I thought it was your post, but I see now. Not sure what brand they are but they are built about the best I have seen. They are square tuning and built very well.
07-15-2013, 03:48 PM
#4159
CF Veteran
I did the "trace the flare" method & it turned out great. But it's too much for 33's & 3 in. of lift. Would be great for 35's.
07-16-2013, 08:10 AM
#4170
Old School CF Moderator
Join Date: May 2010
Location: Chattanooga
Posts: 9,652
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
None of you are really close to me..but just FYI..
We are having a pretty decent little ride this sunday at lewis chapel which is out near Soddy Daisy TN.
If your interested let me know.
We are having a pretty decent little ride this sunday at lewis chapel which is out near Soddy Daisy TN.
If your interested let me know.