Xj88

Lokka lockers.. (same as aussie)

200 for d30, 250 for 8.25

Done

Xj88

Im out for Jeep-Fest. With the wedding coming up in less than 2 months.. Every spare cent I have is going towards getting that paid for.


My next "big" ride will probably be the NAXJA FLOG pending it is at Adventure offroad.

I simply dont have the spare $ to drive my jeep down to JF

Sucks..but gotta take care of the wedding first.

94XjSport94

I need to go read that NAXJA thread

I hope it's at Adventure or Chocco. Durhamtown is the next closest for us but I don't think I'd want to ride there with the other two options.

94XjSport94

Just ordered one for the front

Xj88

Ballin

Lowrange2

Nice...

I run Scott SCBA bottles at 2,000 psi with an Oxy/Acetylene regulator on top.

I can run 200psi for a good little while. Runs air tools and everything.

I can air up my 35's 3 or 4 times before it needs to be refilled.

ctjkelley

My will be similar except, I'm going to plumb it in with a vivair 450c compressor on board as well. I like the oxy/acetylene regulator.

Lowrange2

I do that so I can run 2000psi in the steel bottles and 4500 psi in the carbon bottles.

I just have them refilled at the Fire Department when they're empty.

94XjSport94

You just have a oxy regulator on top of it and that's it?

ctjkelley

.

I understand, I could do that it would probably make more sense since I work there. I guess I was concerned with running out of air, then I would have a compressor on hand to fill the tank.

Lowrange2

Yep, the trick is finding the fitting. You have to have a Scott fitting with 1/4 npt threads on the other end.

Yeah, I usually don't use 1/4 of the tank on a wheeling trip. If I use it at all.

94XjSport94

That's what I figured that the fitting would be tricky.

94XjSport94

Got a pic or any info on the Scott fitting and the other?

Lowrange2

The fitting came on the Scott bottle when I got it. No clue where to find one.

94XjSport94

I'm asking around. I can probably acquire one somehow.