94XjSport94

I replaced that specific one and just needed one more to finish bolting it on.

mdo817

I would have sworn the '96 & '98 would be the same, almost positive my '96 & '01 were and the '01 had twin headers and pre-cats. Might be wrong though.

josh_edwards6

well guys I had a friend/shop owner look at my steering gear box to double check that that's the problem. it's not.. either a cracked spacer or a cracked frame.. can't tell due to the gear box and the unibody tie in bracket being in the way.

Lowrange2

Remove it? It's only a couple bolts.

I must have missed your problem.

mdo817

Uni-body will crack there pretty easy, not real fun to repair either, been there, done that.

94XjSport94

At the JY yesterday I saw a 94 with the stud bolt combo on the front lower exhaust manifold mount. Idk. This APN header fits a little differently and seems like it would be a real PITA to do in the Jeep. I still have a vacuum leak somewhere, park and neutral idle at 1200 and in gear is about 800 like it used to.

Temp gauge reads about 210 or so and the thermostat housing reads 195 with the IR gun. Once I get the exhaust done I'll drain the radiator and add antifreeze and some anti rust stuff. I put all water in there incase I had some leaks or something else was wrong.

Xj88

So..
My LED pods are coming today..ive got a factory fog light switch, and the wiring behind the bumper caps on both sides..
Can I simply cut the connectors off the wires, and splice my pod wiring onto them?

Lowrange2

Yes. That's how the little light bar is wired in my green Jeep.

It kinda sucks though because the light bar only works with the low beams and I gotta have my park lights on for it to work. I'll eventually rewire the switch so that it can be turned on and off when I want it to be.

Xj88

I had planned on using some 15x8 d windows for my XJ...but came across some Ravines..

Thoughts?

94XjSport94

Ravines. Do what Andrew says and wire it up via the switch but use a constant 12v source for the positive leg of the switch.

So tonight at work I walked into the break room and saw a girl with her head on the table and she looked upset/ asleep. I still had my earplugs in and loudly said "Are you alright?" She got scared and started crying. She was having a migraine lol.

Lowrange2

Did you comfort her after you scared the **** out of her? Did you get her number?

William.

94XjSport94

No, I believe she is married with 4 kids. I am trying to talk with this other one there though.

Lowrange2

The married part might be a problem.

94XjSport94

Some people swing that way.

There is one girl that works there everyone says was made for two things. ****ing and reporting people to HR. Lol

mdo817

Stay as far away as you can from that one, and any other married woman as far as that goes.