Any Georgians?
09-19-2014, 11:52 AM
#8791
Junior Member
Sweet! Looks good.
Is the fairlead hole not off center with the spool?
I made the hole in my bumper slightly higher so I had to drill new holes in my fairlead to offset it.
Is the fairlead hole not off center with the spool?
I made the hole in my bumper slightly higher so I had to drill new holes in my fairlead to offset it.
09-19-2014, 12:04 PM
#8792
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Thanks!
From all the pictures I saw of how a fairlead with synthetic rope should work it needs to spool in an out of the fairlead without rubbing the bumper. By the time I clocked the selector over and mounted it up the fairlead was as wide and in the right spot to be mounted up using the bottom two bolts.
Ugh, I had too much Taco Bell for lunch.
From all the pictures I saw of how a fairlead with synthetic rope should work it needs to spool in an out of the fairlead without rubbing the bumper. By the time I clocked the selector over and mounted it up the fairlead was as wide and in the right spot to be mounted up using the bottom two bolts.
Ugh, I had too much Taco Bell for lunch.
09-25-2014, 02:58 PM
#8795
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Any Georgians?
Today is not my day. Jeep is pissing me off because I feel like I'm not getting anything done. This POS is going to be ready for Gulches and then I'm going to forget I have it for a while.
One of my driveshafts is seized up. Doesn't have a grease fitting either. Any ideas how to free it up?
One of my driveshafts is seized up. Doesn't have a grease fitting either. Any ideas how to free it up?
09-25-2014, 10:34 PM
#8799
Member
Join Date: May 2010
Location: Locust Grove, Ga
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
09-27-2014, 07:20 AM
#8803
MJ>XJ
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
Today is not my day. Jeep is pissing me off because I feel like I'm not getting anything done. This POS is going to be ready for Gulches and then I'm going to forget I have it for a while.
One of my driveshafts is seized up. Doesn't have a grease fitting either. Any ideas how to free it up?
One of my driveshafts is seized up. Doesn't have a grease fitting either. Any ideas how to free it up?
09-28-2014, 10:31 PM
#8804
Member
Join Date: May 2012
Location: Covington Ha
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Went to duramtown yesterday with a few buddy's. Ones a 4 door on 33s unlocked front rear, 2 door on 35s lock both and mine a 4 door on 35s and unlocked we all made it up slippery nipple where a rubicon on 37s had to get winched up
09-29-2014, 07:19 AM
#8805
Senior Member
Join Date: Apr 2009
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 liter
was it worth going? I've heard mixed feelings about durhamtown