Any Georgians?
#9271
Junior Member
Any of you want to buy my wheels and tires.
I have 4 good tires and 5 good wheels.
http://greenville.craigslist.org/pts/4857840174.html
I have 4 good tires and 5 good wheels.
http://greenville.craigslist.org/pts/4857840174.html
#9277
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
By the time I get a spare and am fully loaded hopefully it'll sit a little lower. I'm more worried about the down travel of the springs. I want all the uptravel I can get and I'll let the tires self clearance. Eventually I want to dove it when it gets links.
#9278
Member
Join Date: May 2010
Location: Locust Grove, Ga
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Don't let the reds clearance themselves, they will get cut up easy. Why are you wanting up travel? Most folks would rather have a little up and a lot of drop. I have my fronts and rears limited to about 4" up.
#9279
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Thats what I meant. I want all I can use, even if it is only 3-4". Rear is in and done minus bumpstops. I need to get some calipers I can use as a core charge for my fronts.
#9280
Member
Join Date: May 2010
Location: Locust Grove, Ga
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Ok, I misunderstood, still don't let them clearance themselves. I have extended U-bolts plates, YJ bump stops mounted to the unibody, when I went to 39.5's I added 2" square tube to the plates, works really well, I can shoot you a picture tomorrow if you are trying to figure out your bumps.
#9281
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
I had extended plate for my last axle and made some redneck ones from the swap kit I got from Travis. I am going to relocate the frame mounted bumpstop about 2-3" back on the frame and then use some scrap 2x2 tube I have to reinforce the plate to the axle from the added height of my 10 leaf pack and the new leaf perch. I really just need to trim and measure for that. Shouldn't be too hard. I am going to try and get the front axle halfway under the jeep tomorrow. I hope my local steel yard has some DOM, I forgot to order what I needed today.
#9282
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Oh, and I think I am going to need a longer rear brake line. I order a 22" one but I don't think it will be long enough at full flex on the driver side. Might try that part number Travis has instead of order another one.
#9283
CF Veteran
Anyone need a 4.10 geared 8.25? There is one at the PAP north in a green 2 door. Was a 2 wd 4 banger still has good manual windows.
#9284
CF Veteran
Join Date: Nov 2013
Location: Wetumpka, AL
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
Hey guys. I'm looking for a tow vehicle /DD. Chevy/GMC/Ford 2500/3500/250/350. 90s models, ext. Cabr or reg. Cab, 4wd preferred but will entertain 2wd. Gas or diesel dosnt really matter. Trying to keep it under $4500. If you guys know of anything PM me with details. I'm located just north of montgomery, AL. No issue with traveling.
Last edited by drhoward1988; 01-25-2015 at 04:28 PM.