South Florida Dysfunctional 4x4's
CF Veteran
Join Date: Oct 2011
Location: South Central Florida
Posts: 1,976
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Good morning...
Getting it organized still, didn't realize how much shizen I had until I put it all in one place. lol
Going good, still getting organized at the new place and still trying to work and play, not getting to much of the play part but it will come soon...
Getting it organized still, didn't realize how much shizen I had until I put it all in one place. lol
Going good, still getting organized at the new place and still trying to work and play, not getting to much of the play part but it will come soon...
CF Veteran
Join Date: Aug 2010
Location: The Florida State University
Posts: 8,387
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: I-6 4.0 L
CF Veteran
Join Date: Jan 2011
Location: Boynton Beach
Posts: 4,267
Likes: 0
Received 3 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 High O
I guess it could be more of a popping...
A while back I tried that, unfortunately, when it clicked or popped or whatever, it seems to echo and vibrate the entire front end and make it quite difficult to pinpoint, but I also had no idea of where the problem areas might be. I will grab hold of the pitman arm (it is a drop pitman arm, and the tie rod ends feel nice and tight, with minimal play) and the track bar mount and see if I can feel it specifically in one or the other. If it is the track bar mount, has anyone had any luck with the adjustable track bar with the mount that Rough Country sells for $130? Clicky Clicky I have the Rough Country 4.5" lift, so it will work, however I don't know if that mount will replace the existing mount or mount directly to it.
Junior Member
Join Date: Feb 2013
Location: Florida
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
And I haven't had any issues with my RC lift so far. I will be purchasing the upper control arms from them shortly, as I fear the stamped stock ones will be the weakest link shortly.
Edit:
Though after taking a look, my laziness is getting the better of me. Clicky Clicky. That does seem like a better deal than $252 for just the trackbar.
Last edited by ChiefAcorn; 04-17-2013 at 12:02 AM.
My only issue with breaking the $200 mark is I would be getting dangerously close to buying the JKS adjustable trackbar and welding together a custom mount out of 1/4 inch steel.
And I haven't had any issues with my RC lift so far. I will be purchasing the upper control arms from them shortly, as I fear the stamped stock ones will be the weakest link shortly.
Edit:
Though after taking a look, my laziness is getting the better of me. Clicky Clicky. That does seem like a better deal than $252 for just the trackbar.
And I haven't had any issues with my RC lift so far. I will be purchasing the upper control arms from them shortly, as I fear the stamped stock ones will be the weakest link shortly.
Edit:
Though after taking a look, my laziness is getting the better of me. Clicky Clicky. That does seem like a better deal than $252 for just the trackbar.