Originally Posted by pulltabmike

I have 40' of 1.5" Sch 40 and 20' of 1.25" sch 40 waiting to be bent......
Just gotta find the time to get up there

Originally Posted by Green2000

I smell vinyl decals of this, but he needs to be driving something

Originally Posted by mikefrost

a 4x8 sheet at Blvd is 183.04 + tax and I'd think you could easily get 3 front bumpers out of that, maybe 4

Originally Posted by Green2000

I still gotta rig that reservoir to where it doesnt leak all over, but I did grab a huge bottle of hydro oil and found out the shaft wasnt bent on the notcher it was just the holesaw so that should be good to go now

Originally Posted by Green2000

Thats why I said I gotta lay out the templates to get the best configuration

Originally Posted by NattyBoh

hey guys speaking of Advance auto parts coupons... I do it ALL the time. Consistently saving 30,40,50+ bucks at a time. Sometimes you have to make two order to get the best discount. Say you use the 20 off of 50 dollar purchase, and you have a 105 dollar order.. well separate the order into two 50 buck purchases so you can save 40 bucks on both. the 20 off of 50 is their best coupon. its 41% off.

here is the list of coupons. .. IMO its a no brainer. All you do it order online and drive to the store, give them print out of order... profit



20% off w/ coupon code: P20 (Maximum discount is $50)
$10 off $30 w/ coupon code: ES123 / A123 / VISA / CCABIN / RETMENOT123
$15 off $40 w/ coupon code: BIG15
$20 off $50 w/ coupon code: ES123 / A123 / CCABIN / RETMENOT123 ( BEST ONE!! )
$20 off $75 w/ coupon code: BIG20
$30 off $75 w/ coupon code: BIG30 / VISA
$30 off $100 w/ coupon code: ES123 / A123 / RETMENOT123
$35 of $85 w/ coupon code: RAF7JA1102
$40 off $100 w/ coupon code: CCABIN
$50 off $150 w/ coupon code: VISA
$50 off $200 w/ coupon code: BIG50
25% off brake purchases over $99.99 w/ coupon code: BRKX
20% off brake purchases under $99.99 w/ coupon code: BRKX

Originally Posted by Green2000

Front bumper is here. Some assembly required, batteries not included.

Attachment 110841

Originally Posted by Pudgy Fingers

2001 with only 40k miles.

Attachment 110843

Originally Posted by mikefrost

What plasma cutter do you use Alex?

Originally Posted by Green2000

OK so JCR sent me Grade 5 hardware for the winch bumper, I know with its mounting location they wont bear any weight it is going to all be shear tension. Is 85 ksi high enough?