Maryland Cherokee Club
CF Veteran
Join Date: Dec 2011
Location: Pasadena, MD
Posts: 4,006
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
true. lurkin like a ****
x2
.... ?
.... ?
CF Veteran
Join Date: Feb 2012
Location: Sykesville, Md
Posts: 2,961
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
CF Veteran
Join Date: Jan 2012
Location: Baltimore, MD
Posts: 8,272
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
wheel spacers: i'd like 1 or 1.5 inch ones, but idk which ones to get. ebay is ok? they need to bolt onto the stock studs and have their own studs right?
and the GF just came back from shopping on the boardwalk and brought me back a jeep shirt. lol.
and the GF just came back from shopping on the boardwalk and brought me back a jeep shirt. lol.
Seasoned Member
Join Date: Mar 2012
Location: Glen Burnie, MD
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
☠ CF Sheriff ☠
I have rough country ones. I also recommend the Synergy ones on quadratec and spidertrax. Get the hubcentric ones (5x4.5)
☠ CF Sheriff ☠
and if you are going to run wheel spacers, you need to invest in a torque wrench. They need to be torqued to a spec, and you need to remove each wheel and re-check them every couple months.
CF Veteran
Join Date: Mar 2009
Location: Berea, OH
Posts: 7,996
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
My jeep is for sale now through Friday ONLY. If I can sell it, I have a big plan.
Don't worry...I have another Cherokee.
1994 XJ SE with around 165K on the clock.
I have done SO MUCH mechanical work to this truck it is stupid.
ALL sensors are new in the last year, engine is CLEAN and runs PERFECT. Entire cooling system was replaced with high flow t-stat and housing, 2 row aluminum radiator...etc, etc....runs 15w-40 Rotella. TB Spacer and CAI on the COLD side. 240z Hood vents, strut arm hood support.
This truck has had the gas tank relocation raising the gas tank out of harms way with a custom box built around it.
Floors are all new and the unibody frame has been sleeved in 3/16" steel. Interior....well...this should be a trail rig...lol...it is not bad. No carpet. Has 1997 Leather ZJ seats. Map light mirror, Cobra 29 LTD CB, Alpine stereo.
Running on 30x9.5 MT's on freshly painted black steelies.
All new (well 50k) UpCountry edition suspension...springs, shocks, etc.
Sunroof I installed with sandable/paintable marine sealant.
Wagoneer front clip.
Here is what I am willing to throw in to make the deal sweet.
Entire 3: lift kit:
Leafs
Springs
4 shocks (JK RUBI) with RC bar pin eliminators
sway bar with JKS disconnects
BEEFY motor mounts
adjustable track bar
Adjustable upper and lower control arms
MJ shackles
2" spacers
I will also throw in a 99 Intake with steering pump bracket, and 5 Turbine wheels (they need cleaned/media blasted). Also front and rear vent windows factory tinted.
All is still needs is some rust repair. If it seals the deal I will throw in a gallon on Duplicolor Kevlar Bedliner and 1.5 gallons of OD Green paint
$1400 for ALL of it...now till Friday. With all of this, you could build a mean trail rig. Does pass emissions.
301-524-0494
Don't worry...I have another Cherokee.
1994 XJ SE with around 165K on the clock.
I have done SO MUCH mechanical work to this truck it is stupid.
ALL sensors are new in the last year, engine is CLEAN and runs PERFECT. Entire cooling system was replaced with high flow t-stat and housing, 2 row aluminum radiator...etc, etc....runs 15w-40 Rotella. TB Spacer and CAI on the COLD side. 240z Hood vents, strut arm hood support.
This truck has had the gas tank relocation raising the gas tank out of harms way with a custom box built around it.
Floors are all new and the unibody frame has been sleeved in 3/16" steel. Interior....well...this should be a trail rig...lol...it is not bad. No carpet. Has 1997 Leather ZJ seats. Map light mirror, Cobra 29 LTD CB, Alpine stereo.
Running on 30x9.5 MT's on freshly painted black steelies.
All new (well 50k) UpCountry edition suspension...springs, shocks, etc.
Sunroof I installed with sandable/paintable marine sealant.
Wagoneer front clip.
Here is what I am willing to throw in to make the deal sweet.
Entire 3: lift kit:
Leafs
Springs
4 shocks (JK RUBI) with RC bar pin eliminators
sway bar with JKS disconnects
BEEFY motor mounts
adjustable track bar
Adjustable upper and lower control arms
MJ shackles
2" spacers
I will also throw in a 99 Intake with steering pump bracket, and 5 Turbine wheels (they need cleaned/media blasted). Also front and rear vent windows factory tinted.
All is still needs is some rust repair. If it seals the deal I will throw in a gallon on Duplicolor Kevlar Bedliner and 1.5 gallons of OD Green paint
$1400 for ALL of it...now till Friday. With all of this, you could build a mean trail rig. Does pass emissions.
301-524-0494
CF Veteran
Join Date: Dec 2011
Location: Pasadena, MD
Posts: 4,006
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
My jeep is for sale now through Friday ONLY. If I can sell it, I have a big plan.
Don't worry...I have another Cherokee.
1994 XJ SE with around 165K on the clock.
I have done SO MUCH mechanical work to this truck it is stupid.
ALL sensors are new in the last year, engine is CLEAN and runs PERFECT. Entire cooling system was replaced with high flow t-stat and housing, 2 row aluminum radiator...etc, etc....runs 15w-40 Rotella. TB Spacer and CAI on the COLD side. 240z Hood vents, strut arm hood support.
This truck has had the gas tank relocation raising the gas tank out of harms way with a custom box built around it.
Floors are all new and the unibody frame has been sleeved in 3/16" steel. Interior....well...this should be a trail rig...lol...it is not bad. No carpet. Has 1997 Leather ZJ seats. Map light mirror, Cobra 29 LTD CB, Alpine stereo.
Running on 30x9.5 MT's on freshly painted black steelies.
All new (well 50k) UpCountry edition suspension...springs, shocks, etc.
Sunroof I installed with sandable/paintable marine sealant.
Wagoneer front clip.
Here is what I am willing to throw in to make the deal sweet.
Entire 3: lift kit:
Leafs
Springs
4 shocks (JK RUBI) with RC bar pin eliminators
sway bar with JKS disconnects
BEEFY motor mounts
adjustable track bar
Adjustable upper and lower control arms
MJ shackles
2" spacers
I will also throw in a 99 Intake with steering pump bracket, and 5 Turbine wheels (they need cleaned/media blasted). Also front and rear vent windows factory tinted.
All is still needs is some rust repair. If it seals the deal I will throw in a gallon on Duplicolor Kevlar Bedliner and 1.5 gallons of OD Green paint
$1400 for ALL of it...now till Friday. With all of this, you could build a mean trail rig. Does pass emissions.
301-524-0494
Don't worry...I have another Cherokee.
1994 XJ SE with around 165K on the clock.
I have done SO MUCH mechanical work to this truck it is stupid.
ALL sensors are new in the last year, engine is CLEAN and runs PERFECT. Entire cooling system was replaced with high flow t-stat and housing, 2 row aluminum radiator...etc, etc....runs 15w-40 Rotella. TB Spacer and CAI on the COLD side. 240z Hood vents, strut arm hood support.
This truck has had the gas tank relocation raising the gas tank out of harms way with a custom box built around it.
Floors are all new and the unibody frame has been sleeved in 3/16" steel. Interior....well...this should be a trail rig...lol...it is not bad. No carpet. Has 1997 Leather ZJ seats. Map light mirror, Cobra 29 LTD CB, Alpine stereo.
Running on 30x9.5 MT's on freshly painted black steelies.
All new (well 50k) UpCountry edition suspension...springs, shocks, etc.
Sunroof I installed with sandable/paintable marine sealant.
Wagoneer front clip.
Here is what I am willing to throw in to make the deal sweet.
Entire 3: lift kit:
Leafs
Springs
4 shocks (JK RUBI) with RC bar pin eliminators
sway bar with JKS disconnects
BEEFY motor mounts
adjustable track bar
Adjustable upper and lower control arms
MJ shackles
2" spacers
I will also throw in a 99 Intake with steering pump bracket, and 5 Turbine wheels (they need cleaned/media blasted). Also front and rear vent windows factory tinted.
All is still needs is some rust repair. If it seals the deal I will throw in a gallon on Duplicolor Kevlar Bedliner and 1.5 gallons of OD Green paint
$1400 for ALL of it...now till Friday. With all of this, you could build a mean trail rig. Does pass emissions.
301-524-0494
CF Veteran
Join Date: Aug 2011
Location: New Market
Posts: 4,323
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by Green2000
guess that makes me a poser... the grabbers I bought are A/Ts,
CF Veteran
Join Date: Aug 2011
Location: New Market
Posts: 4,323
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by a_shirey
wheel spacers: i'd like 1 or 1.5 inch ones, but idk which ones to get. ebay is ok? they need to bolt onto the stock studs and have their own studs right?
and the GF just came back from shopping on the boardwalk and brought me back a jeep shirt. lol.
and the GF just came back from shopping on the boardwalk and brought me back a jeep shirt. lol.
CF Veteran
Join Date: Jan 2012
Location: Baltimore, MD
Posts: 8,272
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
thanks. im gonna get the synergy hubcentrtic 1.25" ones. i think thatll be plenty including my canyons. itll look beefier like yours too. what size are yours?
CF Veteran
Join Date: Aug 2011
Location: New Market
Posts: 4,323
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by SDC
Damn add me to the poser list too. What if they are 33's? Does that help?