Passt

Jimmy that facebook post made me laugh so hard lol.

jakbob

true. lurkin like a ****

x2

.... ?

Green2000

guess that makes me a poser... the grabbers I bought are A/Ts,

a_shirey

wheel spacers: i'd like 1 or 1.5 inch ones, but idk which ones to get. ebay is ok? they need to bolt onto the stock studs and have their own studs right?

and the GF just came back from shopping on the boardwalk and brought me back a jeep shirt. lol.

SDC

Damn add me to the poser list too. What if they are 33's? Does that help?

jakbob

photoshoptroll.com

hilarious

dukie564

I'd stay away from ebay ones - it's very important they are built well and of the correct materials.

I have rough country ones. I also recommend the Synergy ones on quadratec and spidertrax. Get the hubcentric ones (5x4.5)

dukie564

and if you are going to run wheel spacers, you need to invest in a torque wrench. They need to be torqued to a spec, and you need to remove each wheel and re-check them every couple months.

jimmy21669

My jeep is for sale now through Friday ONLY. If I can sell it, I have a big plan.

Don't worry...I have another Cherokee.

1994 XJ SE with around 165K on the clock.

I have done SO MUCH mechanical work to this truck it is stupid.

ALL sensors are new in the last year, engine is CLEAN and runs PERFECT. Entire cooling system was replaced with high flow t-stat and housing, 2 row aluminum radiator...etc, etc....runs 15w-40 Rotella. TB Spacer and CAI on the COLD side. 240z Hood vents, strut arm hood support.

This truck has had the gas tank relocation raising the gas tank out of harms way with a custom box built around it.

Floors are all new and the unibody frame has been sleeved in 3/16" steel. Interior....well...this should be a trail rig...lol...it is not bad. No carpet. Has 1997 Leather ZJ seats. Map light mirror, Cobra 29 LTD CB, Alpine stereo.

Running on 30x9.5 MT's on freshly painted black steelies.

All new (well 50k) UpCountry edition suspension...springs, shocks, etc.

Sunroof I installed with sandable/paintable marine sealant.

Wagoneer front clip.

Here is what I am willing to throw in to make the deal sweet.

Entire 3: lift kit:
Leafs
Springs
4 shocks (JK RUBI) with RC bar pin eliminators
sway bar with JKS disconnects
BEEFY motor mounts
adjustable track bar
Adjustable upper and lower control arms
MJ shackles
2" spacers

I will also throw in a 99 Intake with steering pump bracket, and 5 Turbine wheels (they need cleaned/media blasted). Also front and rear vent windows factory tinted.

All is still needs is some rust repair. If it seals the deal I will throw in a gallon on Duplicolor Kevlar Bedliner and 1.5 gallons of OD Green paint

$1400 for ALL of it...now till Friday. With all of this, you could build a mean trail rig. Does pass emissions.

301-524-0494

jakbob

um... what?

Pudgy Fingers

I haven't seen your rig off road. Just saying.

Pudgy Fingers

You don't want wheel spacers. PERIOD.

a_shirey

thanks. im gonna get the synergy hubcentrtic 1.25" ones. i think thatll be plenty including my canyons. itll look beefier like yours too. what size are yours?

Pudgy Fingers

No not really. Lol. It seems I struck a chord.

a_shirey

why?