Maryland Cherokee Club
#361
Senior Member
Join Date: Mar 2011
Location: Lexington Park, MD
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Yeah that definitely works for more approach angle, but for more flex room I would go to the bottom of the winshield washer tank on the driver side and then measure and cut the passenger side to match, just my opinion. Probably easier than taking your washer tank out or relocating it, maybe.
#363
Senior Member
Join Date: Mar 2011
Location: Lexington Park, MD
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Be careful with that logic. If that is your hope I would research online to find the measurements for the bushwackers and cut the same, otherwise you could cut too much and not even the bushwackers would fit.
#364
Senior Member
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
Cut too much? lol Even that's a simple fix.
Pick-N-Pull and grab yourself some new(to you) fenders. = $50 pair
and try again.
Pick-N-Pull and grab yourself some new(to you) fenders. = $50 pair
and try again.
#365
Senior Member
Join Date: Mar 2011
Location: Lexington Park, MD
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
True you could do that, then look like a cheap idiot rolling around with mismatched body panels, but hey hack it up man. Don't try to do things right the first time.
#366
Senior Member
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
never said you should try to do it right the first time.
just saying there is no need to worry if you mess it up too much cause there is always a fix. and most of the time always a way to try again.
there has been plenty of times i rolled thru the junk yard and found perfect matching body panels, down to the faded paint job. worse case scenario gets one thats close and repaint it.
just saying there is no need to worry if you mess it up too much cause there is always a fix. and most of the time always a way to try again.
there has been plenty of times i rolled thru the junk yard and found perfect matching body panels, down to the faded paint job. worse case scenario gets one thats close and repaint it.
#368
☠ CF Sheriff ☠
just a feeler - trying to put together a Meet and Greet this week around Laurel or Columbia.
Thoughts? Locations? Availability?
Friday is the only day no good for me this week
Thoughts? Locations? Availability?
Friday is the only day no good for me this week
#369
Senior Member
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
that would be sweet, but i work all day on saturdays and tue-sun from 2p-8p im on the clock as well... anything before then or on mondays and im game
#371
Seasoned Member
Join Date: Nov 2009
Location: Beltsville, MD
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: I6
I'd possibly be down depending on the day and time. I work nights from thurs-sat but during the week I am free any evening. . . . . almost
#373
☠ CF Sheriff ☠
the junkyard gods were good to me last Friday
Dodge Dakota Rear springs for my bastard pack:
Dodge Dakota Rear springs for my bastard pack:
#375
Senior Member
Join Date: Mar 2011
Location: Lexington Park, MD
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6