Maryland Cherokee Club
07-17-2012, 07:59 AM
CF Veteran
Join Date: Feb 2012
Location: Bowie, MD
Posts: 2,716
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Don't fret Justin, I still may need it because I'm now going long arm with RE leaf packs on my '99 and taking the 4.5" lift I was going to use on it and putting it on the '95.
So with the dropped track bar I'm good on the pitman arm or should I just say **** it and get one anyway cause they're not that expensive?
So with the dropped track bar I'm good on the pitman arm or should I just say **** it and get one anyway cause they're not that expensive?
07-17-2012, 08:03 AM
☠ CF Sheriff ☠
drop trackbar mount = drop pitman arm required to match
no drop trackbar mount = no dropped pitman arm
no drop trackbar mount = no dropped pitman arm
07-17-2012, 08:04 AM
CF Veteran
Join Date: Feb 2012
Location: Bowie, MD
Posts: 2,716
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
07-17-2012, 08:29 AM
CF Veteran
Join Date: Mar 2009
Location: Berea, OH
Posts: 7,996
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Please and thank you.
07-17-2012, 08:34 AM
CF Veteran
Join Date: Feb 2012
Location: Bowie, MD
Posts: 2,716
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
07-17-2012, 08:58 AM
Senior Member
07-17-2012, 09:06 AM
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by MASCOTT
Good Morning. It's a great day to do absolutely nothing outside,if you don't have too.
07-17-2012, 09:28 AM
CF Veteran
Join Date: Jan 2012
Location: Baltimore, MD
Posts: 8,272
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
Originally Posted by dukie564
those are the front crossmember/ rad support brackets, not the lower frame tie ins
This shows the main brackets and the rad support brackets you just showed
07-17-2012, 10:43 AM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I plan to do a lot of sound deadening: the entire hatch area, most of the trim, and isolaters behind the license plate. Everyone on thirdgen.org has said you can still store the glass in the original place as long as your box sits flush. I haven't heard of any scratching/chipping/breaking on the t-tops.
07-17-2012, 11:54 AM
Senior Member
Join Date: Mar 2011
Location: Sykesville, MD
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 L
Repair the tranny line to fix the leak
the oil pressure sensor is causing your issue - replace it and the problem should go away - make sure the connector is tight and the wire is not kinked. Mine did this for a while too - you prob broke it while changing the filter - very common
the oil pressure sensor is causing your issue - replace it and the problem should go away - make sure the connector is tight and the wire is not kinked. Mine did this for a while too - you prob broke it while changing the filter - very common
And where is the sensor? it's not the oil sending unit right?? I had put a new one (JY one) on with the new motor. And I dont see how it happened with the new filter since it was working fine up until now..