Maryland Cherokee Club
12-16-2011, 02:21 PM
#3782
CF Veteran
Join Date: Dec 2011
Location: Near the airport by the water
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I was rear ended a few months ago and the lady's insurance company said they would take care of everything. I had damage to the rear bumper, the tailgate and the plastic corner. Anyways, I fixed the bumper and the plastic corner but I'm still waiting to find a forest green tailgate at the JY. But back to the good news....
I got the check yesterday and I bought the lift today. I've been wanting to buy a 2"OME lift forever but the amount of the check was more than I thought I would ever get so I called Dirk at DPG and he talked me into the 4" Super Ultimate Kit.
OME Long Travel Shocks
OME Dual Rate Leaf Springs
OME Coil Springs & Spacers
JKS Quicker Disconnects
JKS Adj. Trackbar
JKS Adj Lower Control Arms
DOT SS Front Brakelines
New DPG HD U-Bolt Kit
DPG Front Extended Bump stops
DPG Swaybar Disco Cables
Leaf Spring Bushings
4 Degree Shims
JKS Rear High Clearance Axle Shock Mount
I'm excited about the lift. I'm going to try and install it all at the auto hobby shop on Fort Meade. Once it's installed I'm going to ask around and see if someone can weld on the JKS Shock Mounts for me (possibly pulltabmike if he's feeling up to it).
I got the check yesterday and I bought the lift today. I've been wanting to buy a 2"OME lift forever but the amount of the check was more than I thought I would ever get so I called Dirk at DPG and he talked me into the 4" Super Ultimate Kit.
OME Long Travel Shocks
OME Dual Rate Leaf Springs
OME Coil Springs & Spacers
JKS Quicker Disconnects
JKS Adj. Trackbar
JKS Adj Lower Control Arms
DOT SS Front Brakelines
New DPG HD U-Bolt Kit
DPG Front Extended Bump stops
DPG Swaybar Disco Cables
Leaf Spring Bushings
4 Degree Shims
JKS Rear High Clearance Axle Shock Mount
I'm excited about the lift. I'm going to try and install it all at the auto hobby shop on Fort Meade. Once it's installed I'm going to ask around and see if someone can weld on the JKS Shock Mounts for me (possibly pulltabmike if he's feeling up to it).
12-16-2011, 02:23 PM
#3783
CF Veteran
Join Date: Jul 2011
Location: Elkton, Maryland
Posts: 3,235
Likes: 0
Received 2 Likes
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
I was rear ended a few months ago and the lady's insurance company said they would take care of everything. I had damage to the rear bumper, the tailgate and the plastic corner. Anyways, I fixed the bumper and the plastic corner but I'm still waiting to find a forest green tailgate at the JY. But back to the good news....
I got the check yesterday and I bought the lift today. I've been wanting to buy a 2"OME lift forever but the amount of the check was more than I thought I would ever get so I called Dirk at DPG and he talked me into the 4" Super Ultimate Kit.
OME Long Travel Shocks
OME Dual Rate Leaf Springs
OME Coil Springs & Spacers
JKS Quicker Disconnects
JKS Adj. Trackbar
JKS Adj Lower Control Arms
DOT SS Front Brakelines
New DPG HD U-Bolt Kit
DPG Front Extended Bump stops
DPG Swaybar Disco Cables
Leaf Spring Bushings
4 Degree Shims
JKS Rear High Clearance Axle Shock Mount
I'm excited about the lift. I'm going to try and install it all at the auto hobby shop on Fort Meade. Once it's installed I'm going to ask around and see if someone can weld on the JKS Shock Mounts for me (possibly pulltabmike if he's feeling up to it).
I got the check yesterday and I bought the lift today. I've been wanting to buy a 2"OME lift forever but the amount of the check was more than I thought I would ever get so I called Dirk at DPG and he talked me into the 4" Super Ultimate Kit.
OME Long Travel Shocks
OME Dual Rate Leaf Springs
OME Coil Springs & Spacers
JKS Quicker Disconnects
JKS Adj. Trackbar
JKS Adj Lower Control Arms
DOT SS Front Brakelines
New DPG HD U-Bolt Kit
DPG Front Extended Bump stops
DPG Swaybar Disco Cables
Leaf Spring Bushings
4 Degree Shims
JKS Rear High Clearance Axle Shock Mount
I'm excited about the lift. I'm going to try and install it all at the auto hobby shop on Fort Meade. Once it's installed I'm going to ask around and see if someone can weld on the JKS Shock Mounts for me (possibly pulltabmike if he's feeling up to it).
I'll hook ya up, has to be after the holidays though...
12-16-2011, 02:23 PM
#3784
CF Veteran
Join Date: Dec 2011
Location: Near the airport by the water
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I've got no plans tonight so if anyone want to do any work on their Jeep that requires a lift I can meet them over at Ft. Meade and we can work on it until 8pm. PM me by 4 and I'll call you.
12-16-2011, 02:26 PM
#3786
Registered Users
Join Date: Feb 2011
Location: Baltimore, Maryland
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: Inline 6
no jeep work here, but if u wanted to meet up and hang out for a bit, im good until 6:30 tonight.
12-16-2011, 02:28 PM
#3787
CF Veteran
Join Date: Jul 2011
Location: Elkton, Maryland
Posts: 3,235
Likes: 0
Received 2 Likes
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
Had to blow off some steam, what better way then to work on the heep 
Had Leonard @ L&L fab custom bend me a prerunner bar, went ahead and got that welded on today. Still have to weld on 2 light tabs. Once I find someone with a tubing notcher, I'll get the side bars on.
Cutting my winch plate tomorrow (hopefully) and getting that welded on.
Had Leonard @ L&L fab custom bend me a prerunner bar, went ahead and got that welded on today. Still have to weld on 2 light tabs. Once I find someone with a tubing notcher, I'll get the side bars on.
Cutting my winch plate tomorrow (hopefully) and getting that welded on.
12-16-2011, 02:29 PM
#3788
CF Veteran
Join Date: Dec 2011
Location: Near the airport by the water
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
No problem. I prob won't get it installed until the end of January. I'm trying to decide on which SYE right now. I've narrowed it down to JB Conversions or Advance Adaptors. I'd like to see if I can borrow a front driveshaft from someone once I get this installed so I can measure for the correct driveshaft and order one.
12-16-2011, 02:30 PM
#3789
CF Veteran
Join Date: Dec 2011
Location: Near the airport by the water
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I'll let you know. I'm working on my refrigerator right now. Fan isn't working and the unit's not going into defrost so my freezer is working but the refer portion isn't. I needed to change my oil so that's why I was asking if anyone else needed anything done. They close at 9 but clean up starts at 8.
12-16-2011, 02:31 PM
#3790
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Had to blow off some steam, what better way then to work on the heep
Had Leonard @ L&L fab custom bend me a prerunner bar, went ahead and got that welded on today. Still have to weld on 2 light tabs. Once I find someone with a tubing notcher, I'll get the side bars on.
Cutting my winch plate tomorrow (hopefully) and getting that welded on.
Had Leonard @ L&L fab custom bend me a prerunner bar, went ahead and got that welded on today. Still have to weld on 2 light tabs. Once I find someone with a tubing notcher, I'll get the side bars on.
Cutting my winch plate tomorrow (hopefully) and getting that welded on.
12-16-2011, 02:33 PM
#3791
CF Veteran
Join Date: Dec 2011
Location: Near the airport by the water
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
12-16-2011, 02:34 PM
#3792
CF Veteran
Join Date: Dec 2011
Location: Near the airport by the water
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Had to blow off some steam, what better way then to work on the heep
Had Leonard @ L&L fab custom bend me a prerunner bar, went ahead and got that welded on today. Still have to weld on 2 light tabs. Once I find someone with a tubing notcher, I'll get the side bars on.
Cutting my winch plate tomorrow (hopefully) and getting that welded on.
Had Leonard @ L&L fab custom bend me a prerunner bar, went ahead and got that welded on today. Still have to weld on 2 light tabs. Once I find someone with a tubing notcher, I'll get the side bars on.
Cutting my winch plate tomorrow (hopefully) and getting that welded on.
12-16-2011, 02:36 PM
#3795
☠ CF Sheriff ☠
I was rear ended a few months ago and the lady's insurance company said they would take care of everything. I had damage to the rear bumper, the tailgate and the plastic corner. Anyways, I fixed the bumper and the plastic corner but I'm still waiting to find a forest green tailgate at the JY. But back to the good news....
I got the check yesterday and I bought the lift today. I've been wanting to buy a 2"OME lift forever but the amount of the check was more than I thought I would ever get so I called Dirk at DPG and he talked me into the 4" Super Ultimate Kit.
OME Long Travel Shocks
OME Dual Rate Leaf Springs
OME Coil Springs & Spacers
JKS Quicker Disconnects
JKS Adj. Trackbar
JKS Adj Lower Control Arms
DOT SS Front Brakelines
New DPG HD U-Bolt Kit
DPG Front Extended Bump stops
DPG Swaybar Disco Cables
Leaf Spring Bushings
4 Degree Shims
JKS Rear High Clearance Axle Shock Mount
I'm excited about the lift. I'm going to try and install it all at the auto hobby shop on Fort Meade. Once it's installed I'm going to ask around and see if someone can weld on the JKS Shock Mounts for me (possibly pulltabmike if he's feeling up to it).
I got the check yesterday and I bought the lift today. I've been wanting to buy a 2"OME lift forever but the amount of the check was more than I thought I would ever get so I called Dirk at DPG and he talked me into the 4" Super Ultimate Kit.
OME Long Travel Shocks
OME Dual Rate Leaf Springs
OME Coil Springs & Spacers
JKS Quicker Disconnects
JKS Adj. Trackbar
JKS Adj Lower Control Arms
DOT SS Front Brakelines
New DPG HD U-Bolt Kit
DPG Front Extended Bump stops
DPG Swaybar Disco Cables
Leaf Spring Bushings
4 Degree Shims
JKS Rear High Clearance Axle Shock Mount
I'm excited about the lift. I'm going to try and install it all at the auto hobby shop on Fort Meade. Once it's installed I'm going to ask around and see if someone can weld on the JKS Shock Mounts for me (possibly pulltabmike if he's feeling up to it).