Maryland Cherokee Club
08-04-2012, 01:00 PM
CF Veteran
Join Date: Feb 2012
Location: Bowie, MD
Posts: 2,716
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Man I would like too that's for sure. Its pretty clean. I have to part this last one out and finish mine before I buy anymore. I do plan on picking up a CJ or something this winter. I actually have a friend of mine with a '77 CJ that he wrecked that just needs a front clip that I might pick up on the cheap.
Now on another note, on the '98 I just picked up the studs on the passenger side rear axle were all loose and spinning. This thing is supposed to have cromo axles so I was fearing the worst that I'd have to replace some $500 shafts I cut the studs yesterday and pulled the wheel. Well I found a 5 on 5.5 to 5 on 4.5 adapter.
Any Idea what this axle might be off of??
And do they make a 5 on 5.5 hub for the D30's that I could change instead of running an adapter or 2 different bolt pattern wheels or changing shafts?
Now on another note, on the '98 I just picked up the studs on the passenger side rear axle were all loose and spinning. This thing is supposed to have cromo axles so I was fearing the worst that I'd have to replace some $500 shafts I cut the studs yesterday and pulled the wheel. Well I found a 5 on 5.5 to 5 on 4.5 adapter.
Any Idea what this axle might be off of??
And do they make a 5 on 5.5 hub for the D30's that I could change instead of running an adapter or 2 different bolt pattern wheels or changing shafts?
08-04-2012, 01:05 PM
CF Veteran
Join Date: May 2011
Location: Partlow, va
Posts: 3,380
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Originally Posted by mikefrost
????????
As far as the hub goes I would think they would being the newer jeeps have the d30 and 5 on 5.5
08-04-2012, 01:43 PM
CF Veteran
Join Date: Dec 2011
Location: Pasadena, MD
Posts: 4,006
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
08-04-2012, 01:57 PM
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by jakbob
See? Now what kind of guy am i? You helped me, i helped you lol
08-04-2012, 02:11 PM
Seasoned Member
Join Date: Feb 2011
Location: glen burnie, md
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
08-04-2012, 02:34 PM
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by jakbob
Well i gotta be up there to mess with your truck to figure that out
08-04-2012, 03:04 PM
Seasoned Member
Join Date: Feb 2012
Location: DC metro
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
already behind
not about to quote 5x 8 pages back but here's a pic of my cherokee as promised. not sure if anyone saw but i previously made an ***** of oneself (as md hawk) hammered w/ fiance out of town the night i picked it up from some ghetto dealership in baltimore 6 months ago. been sitting in the corner (contently learnin stuff) since. 3k, tagged. passed emissions on the first go. driven it 3k miles since buying in feb.
pic is in michaux state forest in pa. easy drive for some solid car campin'. supposed to register but we didn't...not much out there and they play it "pretty loose" as stated by the local that recommended the camp spot about 50 yards behind the big rock. no wheelin there though...put it in 4hi but was never needed...just tested it out.
needs tires badly. just going to put kuhmo at's on it, no lift plans. i pry belong in the new stocker group that was recently ripped on in here. (insert appropriate emoticon)
sorry for the long post. instead of putting all that info in 35 replies...there it is. iowa>alabama>georgia>maryland...32 years old and about as much wrenchin experience as previously mentioned younger shirey dude.
08-04-2012, 03:18 PM
CF Veteran
Join Date: Dec 2011
Location: Pasadena, MD
Posts: 4,006
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
Attachment 135260
This is one of the styles of clevis mount I have. I'll upload a picture of the other ones when I get them.
I also have a stock gas tank skid for sale.
This is one of the styles of clevis mount I have. I'll upload a picture of the other ones when I get them.
I also have a stock gas tank skid for sale.