Maryland Cherokee Club
#5071
☠ CF Sheriff ☠
#5073
☠ CF Sheriff ☠
well I cut the rods to length last night, and have all the hardware sorted. Need to fabricate the upper mounts, cut the spacers, and shave the pins for the bottom and they'll be done. I hope to get a lot of that done this weekend.
#5075
Senior Member
Join Date: Apr 2011
Location: Calvert County MD
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1984
Model: Cherokee
Engine: 2.5 L 4cyc
Originally Posted by dukie564
oh crap is that a head bolt?
#5076
Senior Member
Join Date: Apr 2011
Location: Calvert County MD
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1984
Model: Cherokee
Engine: 2.5 L 4cyc
On another note does anyone know someplace I can get a valve cover mines plastic n has a nice crack after I cleaned it up
#5077
CF Veteran
Join Date: Dec 2011
Location: Pasadena, MD
Posts: 4,006
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
maybe if you keep going, you can pull the head off still, and then be able to get the broken bolts (assuming they didnt break flush with the head...)
#5078
CF Veteran
Join Date: Dec 2010
Location: Frederick, Maryland
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Although I thoroughly disagree with you about the Maryland thing, I am very happy you put that tow truck driver in his place!
@Jakbobs hilarious!
@Jakbobs hilarious!
#5079
CF Veteran
Join Date: Dec 2011
Location: Pasadena, MD
Posts: 4,006
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
i hate tow truck drivers as well... except the one that had the big rig tower and 400 feet of line on a crane that pulled me out of coca cola drive...
#5080
CF Veteran
Join Date: Aug 2011
Location: New Market
Posts: 4,323
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by dukie564
I plan on putting 33x12.5s on mine - same size. I know plenty of people who have done that without any issues
#5081
☠ CF Sheriff ☠
nah i'll just adjust the pressure to get a full contact patch, and yes it's my DD. It'll end up being a little taller and not as wide but my research tells me it'll work/ride/wear fine if properly inflated.
#5083
☠ CF Sheriff ☠
I know - that wasn't mine. It's in my "near future mods" plan. Home Depot sells sheets of 48x36 galvanized steel (near the mechanical ducting or steel stock) for <$15. Cut to fit and attach with self-tapping screws
#5085
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Hey, folks. Wondering if anyone would be interested in a set of 4 of these wheels (6 lug, spacing from a '98 GMC pickup).
Having trouble uploading. Will fix it when work slows down.
Having trouble uploading. Will fix it when work slows down.
Last edited by NewKindOfClown; 01-06-2012 at 12:36 PM.