Maryland Cherokee Club
☠ CF Sheriff ☠
Well since you mentioned it....
Looking for preliminary numbers on my next batch of Dukie Disconnects - want to get a rough head count for materials estimating...Plan on starting them after the new year, probably mid January. Should have a batch ready end of Feb (ish).
Whoever is interested in a set - PM me saying so, and the lift height you want them to fit. I figure they'll be around $80 for a set (plus shipping if I have to) - depending on what kind of deals I can find on the materials.
18-8 stainless rod, 1/2" rod ends, all grade 8 hardware, 3/16" brackets. Any length you want.
Looking for preliminary numbers on my next batch of Dukie Disconnects - want to get a rough head count for materials estimating...Plan on starting them after the new year, probably mid January. Should have a batch ready end of Feb (ish).
Whoever is interested in a set - PM me saying so, and the lift height you want them to fit. I figure they'll be around $80 for a set (plus shipping if I have to) - depending on what kind of deals I can find on the materials.
18-8 stainless rod, 1/2" rod ends, all grade 8 hardware, 3/16" brackets. Any length you want.
Last edited by dukie564; 12-18-2012 at 11:49 AM.
CF Veteran
Join Date: Aug 2011
Location: Mt. Rainier, MD
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Welcome. I saw your XJ in the parking lot of Crazy Ray's as I leaving there Saturday morning. Find what you needed?
Seasoned Member
Join Date: Dec 2012
Location: Brooklyn park MD
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0l
yes i need front quick disconnects rear swaybar has been taken out. id be down to buy a set of yours or i was gonna get the jks set.
priority for me right now is fixing my kettle whistle i have and misfire #3 from the heat-soak on injectors. getting a set of injectors soon and not sure if that will fix the heat-soak problem or if i need to wrap them as well.
then i want to upgrade the uni body with stiffeners and fender flares and just got into looking at the Rusty's Conversions - Over-the-Knuckle Steering not sure about that one yet doesn't seems to expensive for what it offers. open to any ideas though.
also stealing your idea dukie for the rear vent tube.
priority for me right now is fixing my kettle whistle i have and misfire #3 from the heat-soak on injectors. getting a set of injectors soon and not sure if that will fix the heat-soak problem or if i need to wrap them as well.
then i want to upgrade the uni body with stiffeners and fender flares and just got into looking at the Rusty's Conversions - Over-the-Knuckle Steering not sure about that one yet doesn't seems to expensive for what it offers. open to any ideas though.
also stealing your idea dukie for the rear vent tube.
CF Veteran
Join Date: Oct 2009
Location: Alaska
Posts: 2,300
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Seasoned Member
Join Date: Dec 2012
Location: Brooklyn park MD
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0l
took my buddie there to get something for his blazer he found that but sadly i cant find a clockspring for mine since i have cruise control and all the ones at rays are 95 or older. is it me though or has rays been getting crappier and crappier with these new owners.
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by NewKindOfClown
If we did, we would go there more often. Legore is closed again, so that leaves the Garrett residence and Rausch.
CF Veteran
Join Date: Dec 2010
Location: Frederick, Maryland
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output